- Home
- Research Areas
- Open positions
- Publications
- News & Events
- Teaching
- Partners
- Members
- Alumni
- Videos
- ArcelorMittal Chair of Steel Construction
Download DoE Fact Sheet
Publications
In press
A refinement indicator for adaptive quasicontinuum approaches for structural lattices; ; ; ; ;
in International Journal for Numerical Methods in Engineering (in press)
The edge-based strain smoothing method for compressible and nearly incompressible non-linear elasticity for solid mechanics; ; ;
E-print/Working paper (in press)
Nitsche’s method for two and three dimensional NURBS patch coupling; ; ; ;
in Computational Mechanics (in press)
A Bayesian framework to identify random parameter fields based on the copula theorem and Gaussian fields: Application to polycrystalline materials; ; ;
in Journal of Applied Mechanics (in press)
2023
Sustainability assessment of a novel reusable and demountable steel-concrete composite floor system; ; ;
in ECPPM 2022 - eWork and eBusiness in Architecture, Engineering and Construction 2022 (2023)
Towards assimilating SAR data into an anisotropic model of an underground aquifer; ;
Scientific Conference (2023)
2022
S-Graphs+: Real-time Localization and Mapping leveraging Hierarchical Representations; ; ; ;
E-print/Working paper (2022)
An adaptive multiscale quasicontinuum approach for mechanical simulations of elastoplastic periodic lattices; ; ; ;
in Mechanics Research Communications (2022), 126
Experimental separation of the onset of slip and sharkskin melt instabilities during the extrusion of silica‑filled, styrene–butadiene rubber compounds; ; ; ; ; ; ;
in Rheologica Acta (2022)
Intersectional Inequalities in Science; ; ;
in Proceedings of the National Academy of Sciences of the United States of America (2022), 119(2), 2113067119
Estimating Probabilistic Safe WCET Ranges of Real-Time Systems at Design Stages; ; ;
in ACM Transactions on Software Engineering and Methodology (2022)
Mapping of machine learning approaches for description, prediction, and causal inference in the social and health sciences; ; ; ; ; ;
in Science Advances (2022), 8
Comprehensive physicochemical and photovoltaic analysis of different Zn substitutes (Mn, mg, Fe, Ni, Co, Ba, Sr) in CZTS-inspired thin film solar cells.; ; ; ; ;
in Journal of Materials Chemistry (2022)
Local Verlet buffer approach for broad-phase interaction detection in Discrete Element Method; ; ; ;
E-print/Working paper (2022)
Laser welding of copper to aluminum with spiral trajectory and identification of excessive aluminum melting; ;
in Journal of Laser Applications (2022)
Simulation technology and application of safe collaborative operations in human-robot interaction; ; ; ; ; ; ; ; ;
in Simulation Technology and Application of Safe Collaborative Operations in Human-Robot Interaction (2022)
Task-Oriented Communication Design in Cyber-Physical Systems: A Survey on Theory and Applications; ; ; ; ;
in IEEE Access (2022)
Sanierung erhaltenswürdiger Gebäude in der Südeifel mit regionaltypischen Bruch-steinmauerwerk im Kontext der Innendämmung; ;
in Bauphysiktage Kaiserslautern (2022, March 29), 5
Discussion of an algorithm to transfer arbitrary shear connector load-slip curves into an effective shear resistance; ;
in Kolloquiumsband - 23 DASt-Forschungskolloquium (2022, February 22)
Blockchain as a driving force for federalism: A theory of cross-organizational task-technology fit; ; ; ;
in International Journal of Information Management (2022)
Electricity powered by blockchain: A review with a European perspective; ; ; ; ;
in Applied Energy (2022), 325
Real-Time Large Deformation Simulations Using Probabilistic Deep Learning Framework; ;
Scientific Conference (2022, June)
Using Artificial Intelligence to Facilitate Assembly Automation in High-Mix Low-Volume Production Scenario; ;
in Procedia CIRP (2022), 107
From ambivalence to trust: Using blockchain in customer loyalty programs; ; ; ;
in International Journal of Information Management (2022)
Assessing the impact of micropollutants mitigation measures using vertical flow constructed wetlands for municipal wastewater catchments in the greater region: a reference case for rural areas; ; ; ; ; ;
in Water Science and Technology (2022)
2021
HISTORIAE, History of Socio-Cultural Transformation as Linguistic Data Science. A Humanities Use Case; ; ; ; ; ;
in Open Access Series in Informatics (2021), 93(2021), 341-3413
Resistance of a new type of flat shear connectors dedicated to composite columns; ; ; ;
in Proceedings of ICMS (2021, June 16)
Monitoring and prediction of hurricane tracks using GPS tropospheric products; ; ; ;
in GPS Solutions (2021), (76),
A CutFEM Method for a spatial resolved energy metabolism model in complex cellular geometriesScientific Conference (2021, January)
A cut finite element method for spatially resolved energy metabolism models in complex neuro-cell morphologies with minimal remeshing; ; ; ;
in Advanced Modeling and Simulation in Engineering Sciences (2021), 8
Microscopic energy consumption modelling of electric buses: model development, calibration, and validation; ; ; ;
in Transportation Research. Part D, Transport and Environment (2021)
Interplay between success and patterns of human collaboration: case study of a Thai Research Institute; ; ; ; ;
in Scientific Reports (2021)
Modelling of residually stressed, extended and inflated cylinders with application to aneurysms; ; ; ;
in Mechanics Research Communications (2021), 111
A hyper-reduction method using adaptivity to cut the assembly costs of reduced order models; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2021), 380
Verringerung des Temperatureinflusses bei der Überwachung von Brücken am Beispiel von Messdaten aus Luxemburg; ; ; ; ;
Conference given outside the academic context (2021)
Frictional interactions for non-localised beam-to-beam and beam-inside-beam contact; ; ;
in International Journal for Numerical Methods in Engineering (2021), 122(7), 1706-1731
A Reusable Structural System Fit for Geometrical Standardisation and Serial Production; ; ;
in Proceedings of the XIII Steel and Composite Construction Conference (2021, November 25)
Algorithm based on 2‐bit adaptive delta modulation and fractional linear prediction for Gaussian source coding; ;
in IET Signal Processing (2021), 15(6), 410-423
Distributed Prediction of Unsafe Reconfiguration Scenarios of Modular Robotic Programmable Matter; ; ; ; ;
in IEEE Transactions on Robotics (2021), 37(6), 2226-2233
Analysis of residual stress relaxation of aluminum alloys EN AW 6061/-82 T6 under cyclic loading; ; ; ;
in Fatigue and Fracture of Engineering Materials and Structures (2021)
Dichtungsanalyse von Elastomer-O-Ringen unter Hochdruck bei Raum- und Tieftemperatur; ;
in Repplinger, Christian (Ed.) 47. VDI-Jahrestagung: Schadensanalyse 2021 - Wasserstoff in metallischen Bauteilen und Mediale und klimatische Beanspruchung von polymeren Produkten (2021, October)
Numerical Investigation of Steel-LVL Timber Composite Beams; ; ;
in Proceedings of the XIII Steel and Composite Construction Conference (2021, November 25)
Stress-induced inflammation evoked by immunogenic cell death is blunted by the IRE1α kinase inhibitor KIRA6 through HSP60 targeting; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Cell Death and Differentiation (2021)
Roadmap on organic–inorganic hybrid perovskite semiconductors and devices; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in APL Materials (2021)
Experimental and analytical evaluation of exhaust air heat pumps in ventilation-based heating systems; ; ; ; ;
in Journal of Building Engineering (2021)
Mobility-Driven and Energy-Efficient Deployment of Edge Data Centers in Urban Environments; ; ; ;
in IEEE Transactions on Sustainable Computing (2021)
2020
BIM-Based End-of-Lifecycle Decision Making and Digital Deconstruction: Literature Review; ; ;
in Sustainability (2020), 12(7), 2670
Building Information Modelling (BIM) for End-of-Lifecycle in Building Stock 4.0;
Poster (2020, September 23)
Laser joining of titanium alloy to polyamide: influence of process parameters on the joint strength and quality; ; ; ; ;
in International Journal of Advanced Manufacturing Technology (2020)
Pre and post-treatments to improve weldability and mechanical properties of Aluminum-Polyamide laser welded specimens; ; ;
in Procedia CIRP (2020), 94
Continuous-wave laser annealing of metallic layers for CuInSe2 solar cell applications: effect of preheating treatment on grain growth; ; ; ; ; ;
in RSC Advances (2020)
RIVER MORPHOLOGY MONITORING OF A SMALL-SCALE ALPINE RIVERBED USING DRONE PHOTOGRAMMETRY AND LIDAR; ; ; ; ;
in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (2020, August 12), XLIII-B2-2020 Article Metrics Related articles(1017), 1024
Multiscale Integration of High-Resolution Spaceborne and Drone-Based Imagery for a High-Accuracy Digital Elevation Model Over Tristan da Cunha;
in Frontiers in Earth Science (2020)
Influence of Thermal Energy Storage and Heat Pump Parametrization for Demand-Side-Management in a Nearly-Zero-Energy-Building using Model Predictive Control; ; ; ;
in Energy and Buildings (2020), 226
Parallel coupling strategy for multi-physics applications in eXtended Discrete Element Method; ; ;
Scientific Conference (2020, June 18)
Practical aspects of the Bank-Weiser estimator implementation and Biomechanics applications.; ; ; ;
Scientific Conference (2020, July)
Removing the saturation assumption in Bank-Weiser error estimator analysis in dimension three; ; ;
in Applied Mathematics Letters (2020), 107
Incorporating trip chaining within online demand estimation; ; ; ;
in Transportation Research. Part B, Methodological (2020), 132
Designing an early failure indicator channel for an in-tank hydrogen valve via a fatigue-based approach; ; ; ;
in Journal of Computational Design and Engineering (2020)
Optimization assisted redesigning a structure of a hydrogen valve: the redesign process and numerical evaluations; ; ;
in International Journal on Interactive Design and Manufacturing (2020)
A Real-Time Approach for Chance-Constrained Motion Planning with Dynamic Obstacles; ; ; ; ;
in IEEE Robotics and Automation Letters (2020), 5(2), 3620-3625
Generalized quasicontinuum modeling of metallic lattices with geometrical and material nonlinearity and variability; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2020), 366(112878),
Experimental and analytical analysis of the load-bearing capacity Pu of improved dry-stacked masonry;
in Journal of Building Engineering (2020), 27
Overcome of bed-joint imperfections and improvement of actual contact in dry-stacked masonry;
in Construction and Building Materials (2020)
Continuous solution of poroelastic problems using Artificial Neural Networks;
Presentation (2020, January 13)
Tracking Hurricanes using GPS atmospheric precipitable water vapor field; ; ; ;
in Beyond 100: The Next Century in Geodesy (2020)
Application of the DAD method for damage 1 localisation on an existing bridge structure using 2 close-range UAV photogrammetry;
in Engineering Structures (2020)
Assessment of the production of biodiesel from urban wastewater-derived lipids; ; ;
in Resources, Conservation and Recycling (2020), 162
Microbial responses to selected pharmaceuticals in agricultural soils: Microcosm study on the roles of soil, treatment and time; ; ; ; ; ; ;
in Soil Biology and Biochemistry (2020), 149
Agent-based, hybrid control architecture for optimized and flexible production scheduling and control in remanufacturing; ;
in Journal of Remanufacturing (2020), (2020),
Agentenbasierte, hybride Steuerungsarchitektur für cyberphysische Refabrikationssysteme; ;
in Jäkel, Jens; Thiel, Robert (Eds.) Tagungsband AALE 2020 Automatisierung und Mensch-Technik-Interaktion (2020, March 05)
Mensch-Roboter-Kollaboration in der Domäne Refabrikation – State-of-the-Art und Ausblick; ;
in Jäkel, Jens; Thiel, Robert (Eds.) Tagungsband AALE 2020 Automatisierung und Mensch-Technik-Interaktion (2020, March 05)
Internal wall insulation with a new aerogel panel: SLENTITE® for energetic retrofit in historic buildings; ; ;
in 12th Nordic Symposium on Building Physics (2020, January)
Eurocode 4 - DIN EN 1994-1-1 Bemessung und Konstruktion von Verbundtragwerken aus Stahl und Beton; ;
Book published by Beuth - 1. Edition (2020)
Integration of time-series meta-omics data reveals how microbial ecosystems respond to disturbance; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Nature Communications (2020)
Highlighting chemical bonding between nylon-6.6 and the native oxide from an aluminum sheet assembled by laser welding; ; ; ; ;
in ACS Applied Polymer Materials (2020)
Isogeometric analysis of thin Reissner-Mindlin shells: locking phenomena and B-bar method; ; ; ; ;
in Computational Mechanics (2020), 65(5), 1323-1341
Automated Fault Tolerance Augmentation in Model-Driven Engineering for CPS; ; ;
in Computer Standards and Interfaces (2020), 70
Impact of pile punching on adjacent piles: Insights 3 from a 3D coupled SPH-FEM analysis; ;
in Applied Mechanics (2020)
Optimum Autofrettage Pressure of Hydrogen Valve Using Finite Element and Fatigue Analysis;
in Engineering (2020), 12(01), 1--24
A review of nature-based solutions for resource recovery in cities; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Blue-Green System (2020), 2(1)
How microbial community composition, sorption and simultaneous application of six pharmaceuticals affect their dissipation in soils; ; ; ; ; ; ; ; ; ;
in Science of the Total Environment (2020), 746
THE NETWORKS OF SCIENCE. DATA-DRIVEN UNDERSTANDING OF SCIENTIFIC PRODUCTION.Presentation (2020, March 05)
Improving open data accessibility through package development and community work; ; ; ; ; ; ;
Poster (2020, July)
Finite deformations govern the anisotropic shear-induced area reduction of soft elastic contacts; ; ; ; ; ;
in Journal of the Mechanics and Physics of Solids (2020), 143
Fatigue phase-field damage modeling of rubber using viscous dissipation: Crack nucleation and propagation; ;
in Mechanics of Materials (2020), 142
Accelerating fatigue simulations of a phase-field damage model for rubber; ; ;
in Computer Methods in Applied Mechanics and Engineering (2020), 370(113247),
Neuere Methoden zur Identifikation und Lokalisierung von Schäden an vorgespannten Betonbrücken; ;
in Bischoff, Manfred; von Scheven, Malte; Oesterle, Bernd (Eds.) Baustatik-Baupraxis 14 (2020, March 23)
Non-localized contact between beams with circular and elliptical cross-sectionsDoctoral thesis (2020)
Beam-inside-beam contact: Mechanical simulations of slender medical instruments inside the human body; ; ;
in Computer Methods and Programs in Biomedicine (2020), 196
Non-localised contact between beams with circular and elliptical cross-sections; ; ;
in Computational Mechanics (2020), 65
Contact between shear-deformable beams with elliptical cross-sections; ;
in Acta Mechanica (2020), 231
Detailed Numerical Three-dimensional and Transient Analysis of a Grate Firing Combustion Process by Innovative High Performance Computing; ; ; ; ; ;
Scientific Conference (2020, April 27)
First-principles modeling of chemistry in mixed solvents: Where to go from here?; ; ; ;
in Journal of Chemical Physics (2020), 152
Inverse simulation for retrieving the undeformed position for hyperelastic materials : application to breast simulations; ; ; ; ;
Scientific Conference (2020, July)
Systematic derivation of Generalized Langevin Equations for coarse-graining and bridge-scaling proceduresScientific Conference (2020, July)
Non-Markovian out-of-equilibrium dynamics: A general numerical procedure to construct time-dependent memory kernels for coarse-grained observables; ;
in Europhysics Letters (2020), 128(4), 40001
Implementation of a new strain split to model unilateral contact within the phase field method; ; ;
in International Journal for Numerical Methods in Engineering (2020)
Phase field simulation of early-age fracture in cement-based materials (Top 10%); ;
in International Journal of Solids and Structures (2020)
Markov Chain Monte Carlo and the Application to Geodetic Time Series Analysis; ;
in Montillet, Jean-Philippe; Bos, Machiel (Eds.) Geodetic Time Series Analysis in Earth Sciences (2020)
Optimisation of the mechanical properties of Miscanthus lightweight concrete (Top 10 Journal);
in Construction and Building Materials (2020)
Process analysis in thermal process engineering with high-performance computing using the example of grate firing; ; ; ; ; ; ;
in Scherer, Viktor; Fricker, Neil; Reis, Albino (Eds.) Proceedings of the 12th European Conference on Industrial Furnaces and Boilers (2020, November)
Model and Solution Methods for the Mixed-Fleet Multi-Terminal Bus Scheduling Problem; ; ;
in Transportation Research Procedia (2020, January), 47
Creation of an ISO Standard at the Example of Value Stream Management Method; ; ;
in Jakobs, Kai (Ed.) Shaping the Future Through Standardization (2020)
DEM simulation of dense granular flows in a vane shear cell: Kinematics and rheological laws; ; ;
in Powder Technology (2020)
A DEM modeling of biomass fast pyrolysis in a double auger reactor;
in International Journal of Heat and Mass Transfer (2020), 150
APIS: Applications and Potentials of Intelligent Swarms for magnetospheric studies; ; ; ;
in Proceedings of 71st International Astronautical Congress - The Cyberspace Edition (2020, October)
Designing of the module envelope of a hybrid modular building to meet the passive house standards in Luxembourg; ; ;
in IOP Conference Series: Earth and Environmental Science (2020, November 20), 588(5), 052026
A comparison of constitutive models for describing the flow of uncured styrene-butadiene rubber; ; ; ; ; ; ;
in Journal of Non-Newtonian Fluid Mechanics (2020), 286
Numerical determination and experimental verification of the optimum autofrettage pressure for a complex aluminium high-pressure valve to foster crack closure; ; ; ; ;
in Fatigue and Fracture of Engineering Materials and Structures (2020)
Influence of pubic symphysis stiffness on pelvic load distribution during single leg stance; ; ;
in International Journal of Numerical Methods in Biomedical Engineering (2020)
Mixed-fleet single-terminal bus scheduling problem: Modelling, solution scheme and potential applications; ; ;
in Omega: the International Journal of Management Science (2020), 96
Politiques de synchronisation dans les systèmes multi-agents distribués parallèles; ; ; ;
in Rousset, Alban (Ed.) Politiques de synchronisation dans les systèmes multi-agents distribués parallèles (2020, June 29)
Analysis of Cooperative Bus Priority at Traffic Signals; ;
in IEEE Transactions on Intelligent Transportation Systems (2020), 21(5), 1929-1940
Heavy Alkali Treatment of Cu(In,Ga)Se2 Solar Cells: Surface versus Bulk effects; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Advanced Energy Materials (2020)
Anaerobe Vergärung von (synthetischem) Küchenabfall in zweistufigem Semi-Konti-Betrieb; ;
in Chemie Ingenieur Technik (2020, August 28), 92(9), 1267-1268
Mesophilic and Thermophilic Anaerobic Digestion of Model Kitchen Waste with Variation of Fat Content; ;
in Chemie Ingenieur Technik (2020), (2020),
Prevention of Electrostatic Charge Generation in Filtration of Low-Conductivity Oils by Surface Modification of Modern Filter Media; ;
in Tribology Transactions (2020)
Tidal analysis of GNSS reflectometry applied for coastal sea level sensing in Antarctica and Greenland; ; ;
in Remote Sensing of Environment (2020), 248
Mixed Integer Linear Programming and Constraint Programming Models for the Online Printing Shop Scheduling Problem; ; ; ;
in Computers and Operations Research (2020)
Metaheuristics for the Online Printing Shop Scheduling Problem; ; ;
in European Journal of Operational Research (2020)
Performance of lime-metakaolin pastes using gravel wash mud (GWM);
in Cement and Concrete Composites (2020), 114(103772),
Solution-based synthesis of kesterite thin film semiconductors; ; ; ; ; ; ; ; ; ; ;
in Journal of Physics : Energy (2020)
Monotonic axial compressive behaviour and confinement mechanism of square CFRP-steel tube confined concrete; ; ; ; ;
in Engineering Structures (2020)
Gravity monitoring of underground flash flood events to study their impact on groundwater recharge and the distribution of karst voids; ; ; ; ; ; ;
in Water Resources Research (2020), 56(n/a), 2019026673
The results of CCM.G-K2.2017 key comparison; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Metrologia (2020), 57(1A), 07002--07002
2019
A unified enrichment approach addressing blending and conditioning issues in enriched finite elements; ;
in Computer Methods in Applied Mechanics and Engineering (2019), 349
Influence of Aluminum Laser Ablation on Interfacial Thermal Transfer and Joint Quality of Laser Welded Aluminum–Polyamide Assemblies; ; ; ; ;
in Coatings (2019), 9(11),
Laser polishing of Aluminum and Polyamide for dissimilar laser welded assemblies; ;
Scientific Conference (2019, June 27)
ADVANCES IN GEOMETRY INDEPENDENT APPROXIMATIONS; ; ; ; ; ; ; ; ;
Scientific Conference (2019, April 11)
An Active Learning Approach for Improving the Accuracy of Automated Domain Model Extraction; ; ;
in ACM Transactions on Software Engineering and Methodology (2019), 28(1),
A comparison between conventional Earth Observation Satellites and CubeSats; Requirements, Capabilities and Data Quality; ; ;
Scientific Conference (2019, September 11)
Conventional EO Satellites vs. CubeSats; FDL - AI flood detection onboard a Nano Satellite; ;
Scientific Conference (2019, December 11)
Towards a high-resolution drone-based 3D mapping dataset to optimise flood hazard modelling; ; ;
in International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (2019, June), XLII-2/W13
A simple and robust computational homogenization approach for heterogeneous particulate composites; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2019), 349
Geometrical and material uncertainties for the mechanics of composites; ; ; ; ; ; ; ; ; ;
Scientific Conference (2019)
Model order reduction applied to ALE‐fluid dynamics;
in Proceedings in Applied Mathematics and Mechanics (2019)
Demand-Side-Management Potentials for Heat-Pumps in Residential Buildings; ; ;
Scientific Conference (2019, September 02)
Fusing the Seth-Hill strain tensors to fit compressible elastic material responses in the nonlinear regimein International Journal of Mechanical Sciences (2019), 163
Graft materials provide greater static strength to medial opening wedge high tibial osteotomy than when no graft is included; ; ; ; ; ; ;
in Journal of Experimental Orthopaedics (2019), 6(13),
Co-located Partitioning Strategy and Dual-grid Multiscale Approach for Parallel Coupling of CFD-DEM Simulations; ; ; ;
Scientific Conference (2019, June 05)
New Trends in Observer-based Control: An Introduction to Design Approaches and Engineering Applications, Chapter 13: Observer-based Event-triggered Attack-Tolerant Control Design for Cyber-physical Systems;
in New Trends in Observer-based Control: An Introduction to Design Approaches and Engineering Applications, Chapter 13: Observer-based Event-triggered Attack-Tolerant Control Design for Cyber-physical Systems (2019)
On the Event-based Attack-tolerant Control: A Polytopic Representation;
in Bezzaoucha, Souad (Ed.) International Conference on Automation, Control and Robots (2019, October)
Simultaneous State and False-Data Injection Attacks Reconstruction for NonLinear Systems: an LPV Approach;
in Bezzaoucha, Souad (Ed.) International Conference on Automation, Control and Robots (2019, October)
Stability Analysis of Power Networks under Cyber-Physical Attacks: an LPV-Descriptor Approach;
in Bezzaoucha, Souad (Ed.) International Conference on Control, Decision and Information Technologies (2019, April)
Event Notification in CAN-based Sensor Networks; ; ; ; ;
in IEEE Transactions on Industrial Informatics (2019), 15(10), 5613-5625
Megacolumns with several reinforced steel profiles – experimental and numerical investigations; ;
in Structures (2019), 21
Using the Vertical Land Movement estimates from the IGS TIGA combined solution to derive Global Mean Sea Level changes; ; ;
Scientific Conference (2019, December 13)
Meshing or not meshing - Iso/sub/super-geometric analysis (adaptive unfitted methods for real-time simulations) Immersed collocation methods
Scientific Conference (2019, January 04)
Multiscale fracture: a natural connection between reduced order models and homogenisation; ; ; ; ; ; ;
Scientific Conference (2019, May 13)
Displacement based polytopal elements a strain smoothing and scaled boundary approach;
Scientific Conference (2019, May 03)
Security, reliability and regulation compliance in Ultrascale Computing System; ; ; ; ;
in Zomaya, A. Y.; Carretero, J.; Jeannot, E. (Eds.) Ultrascale Computing Systems (2019)
Impact of operation mode for biochar and zeolite-based planted vertical flow wetlands: how to enhance the removal of 27 micropollutants in medium-sized WWTP; ;
in Book of abstracts Micropol 2019 (2019, August 21)
ROLE OF TARGETED BIOCHAR-ACTIVATION IN THE REMOVAL OF MACRO- AND MICROPOLLUTANTS FROM SECONDARY EFFLUENT WASTEWATER; ;
in Book of Abstracts 8th International Symposium On Wetland Pollutant Dynamics and Control (2019, January 30)
A material and component bank to facilitate material recycling and component reuse for a sustainable construction: concept and preliminary study;
in Clean Technologies and Environmental Policy (2019)
Incorporating trip chaining within online demand estimation; ; ; ;
in Transportation Research. Part B, Methodological (2019)
Incorporating trip chaining within online demand estimation; ; ; ;
in Transportation Research Procedia (2019), 38
A Big Data Demand Estimation Framework for Modelling of Urban Congested Networks;
in CSUM 2018, AISC 879 proceedings (2019)
Innovative designs of an in-tank hydrogen valve towards direct metal laser sintering compatibility and fatigue life enhancement;
in Structural and Multidisciplinary Optimization (2019)
A Survey on Mobile Crowdsensing Systems: Challenges, Solutions, and Opportunities; ; ; ; ;
in IEEE Communications Surveys and Tutorials (2019), 21(3, thirdquarter 2019), 2419-2465
Crowdsensed Data Learning-Driven Prediction of Local Businesses Attractiveness in Smart Cities; ; ; ; ; ;
in IEEE Symposium on Computers and Communications (ISCC), Barcelona, Spain, 2019 (2019, July)
"Keine Schwarzseher" Forscher der Universität Luxemburg unterstützen Jugendliche von "Fridays for Future"; ; ; ; ;
Article for general public (2019)
Leveraging GIS Data and Topological Information to Infer Trip Chaining Behaviour at Macroscopic Level; ; ;
Scientific Conference (2019, June)
Coupled molecular-dynamics and finite-element-method simulations for the kinetics of particles subjected to field-mediated forces; ; ; ; ; ;
in Physical Review. E ,Statistical, Nonlinear, and Soft Matter Physics (2019), 99(6),
A non-invasive tool for attention-deficit disorder analysis based on gaze tracks; ; ; ;
in Proceedings of the 2nd International Conference on Applications of Intelligent Systems (2019)
Real-Time Human Head Imitation for Humanoid Robots; ; ; ;
in Proceedings of the 2019 3rd International Conference on Artificial Intelligence and Virtual Reality (2019, July)
Understanding and Modelling Human Attention for Soft Biometrics Purposes; ; ; ;
in AIVR 2019: Proceedings of the 2019 3rd International Conference on Artificial Intelligence and Virtual Reality (2019)
Video Indexing Using Face Appearance and Shot Transition Detection; ; ; ; ;
in Proceedings of the IEEE International Conference on Computer Vision Workshops (2019)
Vision-Based Aircraft Pose Estimation for UAVs Autonomous Inspection without Fiducial Markers; ; ;
in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society (2019, October)
On a Software-Defined CAN Controller for Embedded Systems; ; ;
in Computer Standards and Interfaces (2019), 63
Adaptive equation-free multiscale modeling of metallic lattices with geometrical nonlinearity and variability; ; ; ;
Scientific Conference (2019, September 12)
Equation-free multiscale modeling of metallic lattices with geometrical and material nonlinearity and variability; ; ; ;
Scientific Conference (2019, September 05)
Structural shape optimization of three dimensional acoustic problems with isogeometric boundary element methods; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2019), 355
An optimized short-arc approach: methodology and application to develop refined time series of Tongji-Grace2018 GRACE monthly solutions; ; ; ; ; ; ;
in Journal of Geophysical Research. Solid Earth (2019), 124(6), 6010-6038
The impact of macro-substrate on micropollutant degradation in activated sludge systemsDoctoral thesis (2019)
Influence of Macro-Substrate Composition in Wastewater on Micropollutant Removal; ; ; ; ;
in the mobile app "MICROPOL 2019" (2019)
Effective bending stiffness of heavy steel-concrete composite columns with multiple encased steel profiles; ; ;
in Proceedings of 9th International Conference on Steel and Aluminium Structures (ICSAS19) (2019)
Transfer of shear stresses at steel-concrete interface – Experimental tests and literature review; ; ; ;
in Steel Construction (2019), 12(1), 44-54
A case study on the impact of masking moving objects on the camera pose regression with CNNs; ; ;
in 2019 16th IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS) (2019, November 25)
Faster Visual-Based Localization with Mobile-PoseNet; ; ;
in International Conference on Computer Analysis of Images and Patterns (2019, August 22)
Supply characteristics and membership choice in round-trip and free-floating carsharing systems; ; ;
Scientific Conference (2019, June)
Impact of Road Pricing in Round-Trip and Free-Floating Carsharing Operations; ;
Scientific Conference (2019, September)
A mechanical design model for steel and concrete composite members with web openings; ; ;
in Engineering Structures (2019), Engineering Structures 197:109417(109417),
A System and Method for Monitoring Controlling and Troubleshooting of Abrasive Waterjet Cutting ApparatusE-print/Working paper (2019)
The Buckling and Post-Buckling of Steel C-Columns in Elevated Temperature; ;
in Materials (2019), 13(74), 1-12
Observation of room-temperature polar skyrmions; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in NATURE (2019), 568(7752), 368-
A parallel multi-population biased random-key genetic algorithm for electric distribution network reconfiguration; ;
in The Genetic and Evolutionary Computation Conference - GECCO'19 (2019)
Temporal Changes of Seismic Velocity Caused by Volcanic Activity at Mt. Etna Revealed by the Autocorrelation of Ambient Seismic Noise; ; ; ; ;
in Frontiers in Earth Science (2019), 6
Poroelastic material characterisation by means of Artificial Neural Network;
Presentation (2019, November 13)
How Road and Mobile Networks Correlate: Estimating Urban Traffic Using Handovers; ; ;
in IEEE Transactions on Intelligent Transportation Systems (2019)
Mechanical strength of a new plate compared to six previously tested opening wedge high tibial osteotomy implants; ; ; ; ;
in Journal of Experimental Orthopaedics (2019)
Model order reduction accelerated Monte Carlo stochastic isogeometric method for the analysis of structures with high-dimensional and independent material uncertainties; ; ; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2019), 349
Impact of GPS Antenna Phase Center Models on Zenith Wet Delay and Tropospheric Gradients; ; ;
in GPS Solutions (2019), 23(5),
Tracking hurricanes Harvey and Irma using GPS tropospheric products; ; ; ;
Poster (2019, December 10)
Improved Monitoringand Tracking Hurricanes using GPS Atmospheric WaterVapour; ; ; ;
Poster (2019, April 09)
Mechanical parameters identification of keloid and surrounding healthy skin using Digital Image Correlation measurements in vivo; ; ; ; ; ; ; ; ;
Scientific Conference (2019, December 09)
Curvature based DAD-method for damage localisation under consideration of measurement noise minimisation; ;
in Engineering Structures (2019), 181
A gradient weighted extended finite element method (GW-XFEM) for fracture mechanics; ; ; ;
in Acta Mechanica (2019), 230
Long-term stability of tilt-controlled gPhoneX gravimeters; ; ;
in Journal of Geophysical Research. Solid Earth (2019), 124(11), 12264-12276
A one point integration rule over star convex polytopes; ; ; ;
in Computers and Structures (2019), 215
Assessment of the production of biodiesel from urban wastewater-derived lipids; ; ; ;
Scientific Conference (2019)
Investigation of the Sharkskin melt instability using optical Fourier analysis; ; ; ; ; ; ;
in Journal of Applied Polymer Science (2019), 137(24), 48806
Availability-based dynamic pricing on a round-trip carsharing service: an explorative analysis using agent-based simulation ; ;
in Transportation Research Procedia (2019)
Optimized and flexible scheduling of AGVs and process machines in Re- manufacturing 4 .0 Systems using multi-agent technology and simultaneous scheduling; ;
in Ramírez Fernández, Francisco Javier; Honrubia Escribano, Andrés (Eds.) Abstracts III International Workshop on Autonomous Remanufacturing 2019 (2019, October 02)
Simulation-based optimization using multi-agent technology for efficient and flexible production planning and control in remanufacturing; ;
in International Conference on Remanufacturing (ICoR) 2019 (2019, June 25)
A survey: Scheduling of Automated Guided Vehicles in Flexible (Re-)Manufacturing Systems; ;
in Müller, Rainer; Brüls, Oliver; Abba, Gabriel; Plapper, Peter; Gerke, Wolfgang; Hichri, Bassem; Vette-Steinkamp, Matthias (Eds.) Robotix-Academy Conference for Industrial Robotics (RACIR) 2019 (2019, June)
Fracture modeling with the adaptive XIGA based on locally refined B-splines; ; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2019), 354
High-performance modeling of concrete ageing;
in Proceedings in Applied Mathematics and Mechanics (2019), 19(1),
Vierte Reinigungsstufe für kleine und mittlere Kläranlagenin Wasserwirtschaft Wassertechnik (2019), (4), 6-7
Mikroschadstoffe im Sauer-Einzugsgebiet: Lösungswege abseits der klassischen Eliminationsverfahren;
Book published by Wasser - Infrastruktur - Ressourcen (2019)
Laser welding of polyamide-6.6 and titanium: a chemical bonding story; ; ; ;
Scientific Conference (2019)
Toward fluid-structure-piezoelectric simulations applied to flow-induced energy harvesters; ;
Poster (2019, November 15)
Predictive modelling of the rheological behaviour of fresh self-compacting concreteDoctoral thesis (2019)
On predictive modelling of yield stress increase in fresh cement paste;
in Proceedings in Applied Mathematics and Mechanics (2019), 19(1),
Taylor-Series Expansion Based Numerical Methods: A Primer, Performance Benchmarking and New Approaches for Problems with Non-smooth Solutions; ; ; ;
in Archives of Computational Methods in Engineering (2019)
Liquid crystal elastomer shell actuators with negative order parameter; ; ; ; ;
in Science Advances (2019), 5(4), 1
Adaptive smoothed stable extended finite element method for weak discontinuities for finite elasticity; ; ;
in European Journal of Mechanics. A, Solids (2019), 78
Numerical investigation into the blasting-induced damage characteristics of rocks considering the role of in-situ stresses and discontinuity persistence; ; ;
in Computers and Geotechnics (2019), 116
Identification of optimal process parameters in selective laser sintering; ; ;
Scientific Conference (2019)
Phase field fracture model for viscoplastic materials in large deformations; ;
Scientific Conference (2019, June 13)
Integrated micromechanical model for slope stability analysis;
Scientific Conference (2019, April 09)
Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Model and calibration;
in International Journal of Solids and Structures (2019)
Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part II: validation;
in International Journal of Solids and Structures (2019)
Simulation-based Optimisation Of Selective Laser Sintering/Melting Process;
in Euro PM2019 Congress Proceedings (2019)
A unified polygonal locking-free thin/thick smoothed plate element; ; ; ;
in Composite Structures (2019), 219
B-Spline FEM for Time-Harmonic Acoustic Scattering and Propagation; ;
in Journal of Theoretical and Computational Acoustics (2019), 27
Rule-Based Supervisory Control-Extension for Automated Manufacturing Processes; ;
in International Journal of Mechanical Engineering and Robotics Research (2019)
Systematic monitoring by passive samplers on WWTPs provides new insights in micropollutant elimination, related process parameters and degradation pathways; ; ; ; ; ; ;
Scientific Conference (2019)
Deriving essential components of lean and industry 4.0 assessment model for manufacturing SMEs; ;
in 52nd CIRP Conference on Manufacturing Systems (CMS) (2019), 81
Weak and strong from meshless methods for linear elastic problem under fretting contact conditions; ; ; ; ; ; ; ;
in Tribology International (2019), 138
Análisis empírico del comercio internacional a partir de la segunda mitad del siglo XX.Bachelor/master dissertation (2019)
Old series, new signals. The economic cycle in light of wavelet analysisin Cuadernos del CIMBAGE (2019), 21(II),
Paquete de Herramientas para el procesamiento de la Encuesta Permanente de Hogares; ; ; ;
Software (2019)
Characterisation of demountable shear connector systems in composite beams; ;
Scientific Conference (2019, July 04)
Push-out tests on demountable shear connectors of steel concrete composite structures; ; ; ;
in Structures (2019), 21
Derivation of an exact, nonequilibrium framework for nucleation: Nucleation is a priori neither diffusive nor Markovian; ; ; ;
in Physical Review. E. (2019), 100(5), 052140
An enhanced interface model for friction fatigue problems of axially loaded piles; ; ; ;
in Proceedings of the ASME 2019 38th, International Conference on Ocean, Offshore and Arctic Engineering, Glasgow 9-14 June 2019 (2019, June 09)
Principles for setting single line and multiline control based on network characteristics; ; ; ;
Scientific Conference (2019, September)
A real time hybrid controller for regulating bus operations and reducing stops at signals; ;
Scientific Conference (2019, June)
Towards Optimized Deployment of Electric Bus Systems Using Cooperative ITS; ;
Poster (2019, January)
Evaluation von bauphysikalischen Vormessungen im Rahmen von komplexen Innendämmprojekten; ; ;
in Vogel, Albert (Ed.) Bauphysiktage 2019 in Weimar - Bauphysik in Forschung und Praxis (2019, September 25)
PANAS- Project: Heat Transfer Model Development for Passive Safety Systems,; ; ; ; ;
in NURETH-18 (2019, August 18)
Rate-dependent phase-field damage modeling of rubber and its experimental parameter identification; ;
in Journal of the Mechanics and Physics of Solids (2019)
Energy efficiency and indoor aire quality os seminar rooms in older buildings with and without mechanical ventilation; ;
in Bauphysik (2019), 41(October 2019, Heft 5), 243-251
Comparison of different excitationand data sampling-methods in structural health monitoring; ; ; ;
in Civil Engineering Design (2019), 1
Non-localized Contact Between Beams with Non-Circular Cross Sections; ;
in Proceedings in Applied Mathematics and Mechanics (2019)
Bayesian Identification of Mean-Field Homogenization model parameters and uncertain matrix behavior in non-aligned short fiber composites; ; ; ; ; ; ; ; ;
in Composite Structures (2019), 220
Modelling of Passive Heat Removal Systems: A Review with Reference to the Framatome BWR Reactor KERENA: Part II; ; ; ; ; ; ; ; ;
in Energies (2019)
Deep Reinforcement Learning based Continuous Control for Multicopter Systems; ; ;
in International Conference on Control, Decision and Information CoDIT, Paris 23-26 April 2019 (2019, April 26)
A stochastic Galerkin cell-based smoothed finite element method (SGCS-FEM); ; ;
in International Journal of Computational Methods (2019), 17(8),
Laser overlap joining from copper to aluminum and analysis of failure zone;
Scientific Conference (2019, June 26)
Laser welding of dissimilar copper and aluminum sheets by shaping the laser pulses;
in Procedia Manufacturing (2019), 36
On the substitutability of traffic light and pricing controllers in transportation networks; ;
Scientific Conference (2019, June)
Fracture mechanism simulation of inhomogeneous anisotropic rocks by extended finite element method; ; ;
in Theoretical and Applied Fracture Mechanics (2019), 104
Modelling of Passive Heat Removal Systems: A Review with Reference to the Framatome KERENA BWR Reactor: Part I; ; ; ; ; ; ; ;
in Energies (2019)
Computational chemo-thermo-mechanical coupling phase-field model for complex fracture induced by early-age shrinkage and hydration heat in cement-based materials; ;
in Computer Methods in Applied Mechanics and Engineering (2019), 348
Role of interfacial transition zone in phase field modeling of fracture in layered heterogeneous structures; ;
in Journal of Computational Physics (2019), 386
Experimental and numerical analysis of early age behavior in non-reinforced concrete; ;
in Construction and Building Materials (2019), 210
Phase field modeling of crack initiation and propagation under complex loading; ;
in International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (2019)
Phase field modeling of interfacial damage in heterogeneous media with stiff and soft interphases; ; ;
in Engineering Fracture Mechanics (2019), 218
Phase field modeling of interfacial crack propagation in quasi-brittle heterogeneous materials; ; ;
in International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (2019)
Modelling of interfacial crack propagation in strongly heterogeneous materials by using phase field method; ; ;
in Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (2019, August 28)
BRIDGE MONITORING WITH HARMONIC EXCITATION AND PRINCIPAL COMPONENT ANALYSIS; ;
in The Baltic Journal of Road and Bridge Engineering (2019)
An Implicit boundary approach for viscous compressible high Reynolds flows using hybrid remeshed particle hydrodynamics method;
in Journal of Computational Physics (2019), 391
Characterisation of a new flat mechanical shear connection mean for steel-concrete composite columns; ; ; ;
in Structures (2019)
Dismountable Flooring Systems for Multiple Use;
in IOP Conference Series: Earth and Environmental Science (2019, February), 225
Parametric study on non-ductile demountable shear connectors;
in ce/papers (2019, September), 3(3-4), 283-288
Equations to predict the shear connection capacity of composite beams with slender profiled steel sheeting; ;
Scientific Conference (2019, July)
Business analytics in manufacturing: Current trends, challenges and pathway to market leadership; ;
in Operations Research Perspectives (2019)
The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications; ; ; ; ; ;
in Particuology (2019), 44
A parallel dual-grid multiscale approach to CFD-DEM couplings; ; ; ;
in Journal of Computational Physics (2019), 378
A DEM approach for modeling biomass fast pyrolysis in a double auger reactorScientific Conference (2019, July)
Mixed Integer Linear Programming Model for the Optimal Operation of a Dual Source Heat Pump; ;
Scientific Conference (2019, April 24)
Optimal Operation of Nearly Zero Energy Buildings using Mixed Integer Linear Programming; ; ;
Scientific Conference (2019, September 10)
Estimating fibres' material parameter distributions from limited data with the help of Bayesian inference;
in European Journal of Mechanics. A, Solids (2019), 75
A Tutorial on Bayesian Inference to Identify Material Parameters in Solid Mechanics; ; ; ;
in Archives of Computational Methods in Engineering (2019)
Identifying elastoplastic parameters with Bayes' theorem considering double error sources and model uncertainty; ; ;
in Probabilistic Engineering Mechanics (2019), 55
Simultaneous finite element analysis of circuit-integrated piezoelectric energy harvesting from fluid-structure interaction;
in Mechanical Systems and Signal Processing (2019), 114
Softwarization of SCADA: Lightweight Statistical SDN-Agents for Anomaly Detection; ; ; ;
in 10th International Conference on Networks of the Future (NoF) (2019, October 04)
Mixed hybrid and electric bus dynamic fleet management in urban networks: a model predictive control approach; ; ; ;
Scientific Conference (2019, June)
Mixed hybrid and electric bus dynamic fleet management in urban networks: a model predictive control approach; ; ;
Scientific Conference (2019, January)
Investigating the effect of controller locations on centralised dynamic traffic control with equilibrium constraints;
Scientific Conference (2019, September)
Investigating the robustness of route-based sensor location policies under variable network demand;
Scientific Conference (2019, June)
Comparison of boundary treatments in thermal Lattice Boltzmann simulations of moving particles in fluids; ; ; ;
in Particle Technology Series (2019, April 09)
Comparison of numerical schemes for 3D Lattice Boltzmann simulations of moving rigid particles in thermal fluid flows; ; ;
in Powder Technology (2019), 356(3), 528-546
Measuring mode I fracture properties of thick-layered structural silicone sealants; ; ; ;
in International Journal of Adhesion and Adhesives (2019), 91
Deep learning based semantic situation awareness system for multirotor aerial robots using LIDAR; ; ;
in 2019 International Conference on Unmanned Aircraft Systems (ICUAS) (2019, June)
A Real-Time 3D Path Planning Solution for Collision-Free Navigation of Multirotor Aerial Robots in Dynamic Environments; ; ; ;
in Journal of Intelligent and Robotic Systems (2019), 93(1-2), 33-53
European design code for composite structures in steel and concrete - Historical development and investigation in the second generation of Eurocode 4in Steel Construction (2019), 12 (2019) Heft 2(02/2019), 70-81
Chancen und Herausforderungen für Stahl-Verbundkonstruktionen im modernen Geschossbau;
in Stahlbau (2019), 88(7),
Zur dehnungsbegrenzten Momententragfähigkeit von Flachdecken in Verbundbauweise;
in Stahlbau (2019), 88(2019)(Heft 7),
PLASTIC DESIGN FOR COMPOSITE BEAMS - ARE THERE ANY LIMITS?; ; ;
in Proceedings of the 9th International Conference on Steel and Aluminium Structures ICSAS19 (2019, July)
Von Effizienz bis Flexibilisierung – ein erfolgreicher Weg mit viel Energie; ;
in Siedlungswasserwirtschaft ‘from K’Town to ,KOSMOS‘ (2019)
A Markov Chain Monte Carlo Approach for Estimating Daily Activity Patterns; ; ; ;
Poster (2019, January)
Elucidation of influencing parameters of the laser butt welding process of dissimilar steel to tungsten alloy sheets;
in Proceedings of International Conference on Competitive Manufacturing COMA'19 (2019, January)
Novel Opportunities by Laser Welding of Dissimilar Materials;
in Proceedings of International Conference on Competitive Manufacturing COMA'19 (2019, January)
Inbetriebnahme und Monitoring einer Feldtestfläche zur außenliegenden Lufttemperierung; ; ; ; ;
in Völker, Conrad; Kornadt, Oliver; Jentsch, Mark; Vogel, Albert (Eds.) Schriftenreihe der Professur Bauphysik, Bauphysiktage 2019 in Weimar - Bauphysik in Forschung und Praxis (2019, September 25)
Auswertung eines Großdemonstrators mit außenliegender Wandtemperierung, Wärmepumpe, Eisspeicher und PTV-Hybridkollektoren; ; ; ;
in Völker, Conrad; Kornadt, Oliver; Jentsch, Mark; Vogel, Albert (Eds.) Schriftenreihe der Professur Bauphysik, Bauphysiktage 2019 in Weimar - Bauphysik in Forschung und Praxis (2019, September 25)
Towards Dynamic Zero Emission Zone Management for Plug-in Hybrid Buses;
Scientific Conference (2019, November)
Three-dimensional DEM investigation of the fracture behaviour of thermally degraded rocks with consideration of material anisotropy; ; ; ; ;
in Theoretical and Applied Fracture Mechanics (2019), 104
Traffic control which maximises network throughput: Some simple examples; ; ; ;
in Transportation Research. Part C, Emerging Technologies (2019), 107
Quasi-dynamic traffic assignment with spatial queueing, control and blocking back; ; ; ;
in Transportation Research. Part B, Methodological (2019)
Cultivation and characterization of human midbrain organoids in sensor integrated microfluidic chips; ; ; ; ; ; ; ; ;
E-print/Working paper (2019)
Parameter identification problem in bimaterial human skin and sensitivity analysis : Uncertainties in biomechanics of skin; ; ; ; ; ; ; ; ;
Scientific Conference (2019, December 09)
Evaluation of global ocean tide models based on tidal gravity observations in China; ; ;
Scientific Conference (2019)
On Recent Activities at GNSS@TG Stations in the South Atlantic Ocean and the Tracking of Hurricanes Using GNSSPresentation (2019, August 07)
Rezente geodätische Akvtitäten im Südatlantik: GNSS und Pegelinstallationen auf Südgeorgien und Tristan da CunhaPresentation (2019, December 05)
Present-Day Land and Sea Level Changes around South Georgia Island: Results from Precise Levelling, GNSS, Tide Gauge and Satellite Altimetry Measurements; ; ; ; ; ; ;
Scientific Conference (2019, July 25)
Recent Activities on Tristan da Cunha Island: Geodetic Installations, Local Tie Measurements and their Analysis; ; ; ; ; ;
Scientific Conference (2019, July 11)
Consolidating Observation of Land and Sea Level Changes around South Georgia Island; ; ; ; ; ; ;
Poster (2019, December 13)
An Effective Hybrid Imperialist Competitive Algorithm and Tabu Search for an Extended Flexible Job Shop Scheduling Problem; ;
in 34th ACM/SIGAPP Symposium On Applied Computing, Limassol, Cyprus April 8-12, 2019 (2019, April 08)
Gravel wash mud, a quarry waste material as supplementary cementitious material (SCM); ;
in Cement and Concrete Research (2019), 124(105833),
Maintenance location routing for rolling stock under line and fleet planning uncertainty; ;
in Transportation Science (2019), 53(5), 1252-1270
A deep neural network approach to predicting clinical outcomes of neuroblastoma patients; ;
in BMC Medical Genomics (2019), 12(8), 178
Lab-scale selection of lipid accumulating bacterium Microthrix parvicella from wastewater activated sludge for biodiesel production;
Scientific Conference (2019, September)
Hydrogeological effects on terrestrial gravity measurements; ; ; ; ; ; ; ; ;
Scientific Conference (2019, December 10)
Evaluation of End-To-End Learning for Autonomous Driving: The Good, the Bad and the Ugly; ; ; ;
in 2nd International Conference on Intelligent Autonomous Systems, Singapore, Feb. 28 to Mar. 2, 2019 (2019, March 01)
Different load bearing mechanisms in headed stud shear connectors for composite beams with profiled steel sheeting; ;
in Steel Construction (2019), 12(3), 184-190
Different load‐bearing mechanisms in headed stud shear connections in composite beams with profiled steel sheeting; ;
in ce/papers (2019, September), 3(3-4), 231-236
Clustering Based Model Order Reduction For Hyper Elastoplastic Material Models; ; ;
Presentation (2019, July 29)
The Impact of Human Mobility on Edge Data Center Deployment in Urban Environments; ; ; ;
in IEEE Global Communications Conference (GLOBECOM), Waikoloa, HI, USA, 2019 (2019, December)
Keynote lecture: Potential of the Deformation Area Difference (DAD)-Method for Condition Assessment of Bridge Structures;
in Proceedings of SMAR 2019 - Fifth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (2019, August)
Potential of the Deformation Area Difference (DAD)-Method for Condition Assessment of Bridge Structures;
Scientific Conference (2019, August 27)
Shape optimization of structures with cutouts by an efficient approach based on XIGA and chaotic particle swarm optimization; ; ; ;
in European Journal of Mechanics. A, Solids (2019), 74
Safer UAV Piloting: A Robust Sense-and-Avoid Solution for Remotely Piloted Quadrotor UAVs in Complex Environments;
in Safer UAV Piloting: A Robust Sense-and-Avoid Solution for Remotely Piloted Quadrotor UAVs in Complex Environments (2019, December)
Behaviour of Circular Fiber-Reinforced Polymer-Steel-Confined Concrete Columns Subjected to Reversed Cyclic Loads: Experimental Studies and FE Analysis; ; ; ;
in Journal of Structural Engineering (2019)
A forcing fictitious domain/immersed boundary method for super-quadric shape of particulate flow simulation of cementitious material; ;
in International Centre for NumericalMethods in Engineering (2019)
A Forcing Fictitious Domain Method to Simulate Fluid-particle Interaction of Particles with Super-quadric Shape; ; ;
in Powder Technology (2019), 360(15/January 2020), 264-277
An interface resolved immersed boundary method in XDEM for particulate flow simulations; ; ;
in International Congress on Particle Technology (2019, April 09)
Model I cohesive zone models of different rank coals; ; ; ;
in International Journal of Rock Mechanics and Mining Sciences (2019), 115
Investigation of the moment redistribution for steel concrete continuous beams;
in The 14th Nordic Steel Construction Conference (2019, September 18)
Slim-floor beam bending moment resistance considering partial shear connection;
in Wald, Frantisek; Jandera, Michal (Eds.) Stability and Ductility of Steel Structures 2019 (2019)
Impact of reinforcement to moment resistance of composite slabs; ;
in The 2019 World Congress on Advances in Structural Engineering and Mechanics (ASEM19) (2019, September 17)
Evaluation of Stratified Condensation Models for a slightly inclined tube unsing ATHELT Code; ; ; ;
in NURETH-18 (2019)
2018
Effect of unmodelled tidal displacements in GPS and GLONASS coordinate time series; ; ;
in Geophysical Journal International (2018), 214(3), 2195-2206
Improving the conditioning of XFEM/GFEM for fracture mechanics problems through enrichment quasi-orthogonalization; ;
in Computer Methods in Applied Mechanics and Engineering (2018)
Multiple crack detection in 3D using a stable XFEM and global optimization; ;
in Computational Mechanics (2018)
On the effect of grains interface parameters on the macroscopic properties of polycrystalline materials; ;
in Computers and Structures (2018), 196
Dissimilar Laser Micro-Welding of Nickel Wire to CuSn6 Bronze Terminal;
in Transactions of the Indian Institute of Metals (2018)
Laser micro-welding of wire to flat geometry for dissimilar materials in an electromechanical application;
Poster (2018, September 11)
Weakening the tight coupling between geometry and simulation in isogeometric analysis: from sub- and super- geometric analysis to Geometry Independent Field approximaTion (GIFT); ; ;
in International Journal for Numerical Methods in Engineering (2018)
Case Study 'Lunar Water and Volatiles' - Lunar resources prospecting with AIPresentation (2018, June 26)
Merging DEMs from VHR Optical Imagery with Drone Data - A High-resolution DEM for Tristan da Cunha;
Scientific Conference (2018, December 12)
Towards multiscale data fusion of high-resolution space borne and terrestrial datasets over Tristan da Cunha; ; ;
Poster (2018, April 10)
Hydrodynamic Analysis of Gas-Liquid-Liquid-Solid Reactors using the XDEM Numerical Approach; ; ;
in Canadian Journal of Chemical Engineering (2018)
Softening and melting modeling of iron ore particles using a discrete - continuous coupling method; ;
Scientific Conference (2018, June 13)
Application of eXtedned Discrete Element Method to the melting process of a packed of particles; ; ;
Scientific Conference (2018, April 25)
Experimental and numerical investigation into the softening Behavior of a packed bed of iron ore pellets;
in Powder Technology (2018), 339
SOFTENING AND MELTING MODELING OF IRON ORE PARTICLES USING A CFD-DEM COUPLING METHOD;
Scientific Conference (2018, September 25)
A parallel and efficient multi-split XFEM for 3-D analysis of heterogeneous materials; ; ;
in Computer Methods in Applied Mechanics and Engineering (2018)
Hi-POD solution of parametrized fluid dynamics problems: preliminary results; ; ; ;
in MS&A series (2018), MS&A series(3),
An equation-free, nested, concurrent multiscale approach without scale-separation;
Scientific Conference (2018, September)
High Performance Computing and Big Data analytics in Luxembourg: Overview and Challenges in the EuroHPC horizon;
Presentation (2018, August)
A Contribution to Cyber-Physical Systems Security: an Event-based Attack-tolerant Control Approach;
in Proceedings of 10th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, SAFEPROCESS 2018 (2018, August 29)
Attack-tolerant Control and Observer-based Trajectory Tracking for Cyber-Physical Systems; ;
in European Journal of Control (2018)
A Decoupling Approach to Design Observers for Polytopic Takagi-Sugeno Models Subject to Unknown Inputs; ; ;
in Proceedings of the 2018 American Control Conference (2018, June 27)
Mega columns with several reinforced steel profiles - experimental and numerical investigations;
in Proceedings of the ASCCS 2018 Conference, Valencia, Spain, June 27-29, 2018 (2018, June)
Multiple Cracks Interactions in Stress Corrosion Cracking: In Situ Observation by Digital Image Correlation and Phase Field Modeling; ; ; ; ; ; ; ;
in Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors (2018)
Data-driven modelling and simulation: fracture and medical simulationsPresentation (2018, February 08)
Lack of separation of scales: A view from reduced order modelling and homogenisation
Speeches/Talks (2018)
Emisure - nature oriented systems for removal of micropollutants from wastewater; ;
Scientific Conference (2018, March 13)
Corotational cut finite element method for real-time surgical simulation: Application to needle insertion simulation; ;
in Computer Methods in Applied Mechanics and Engineering (2018), 345
Utility-Based Kalman Filtering for real-time estimation of daily demand flows; ; ; ;
Scientific Conference (2018)
Evaluating the reliability of the Utility-Based Dynamic OD Estimation on Large Networks;
Scientific Conference (2018, January)
Incorporating activity duration and scheduling utility into equilibrium-based Dynamic Traffic Assignment;
in Transportation Research. Part B, Methodological (2018)
A utility-based dynamic demand estimation model that explicitly accounts for activity scheduling and duration; ; ;
in Transportation Research. Part A, Policy and Practice (2018)
Model Predictive Control for Aerial Collision Avoidance in Dynamic Environments; ; ; ;
in 26th Mediterranean Conference on Control and Automation (MED), Zadar, Croatia, 19-22 June 2018 (2018, June)
Hacia un marco general para el análisis de la diferenciación de la fuerza de trabajo en argentina; ; ;
in Kennedy, Damian (Ed.) Debates en torno a las condiciones actuales de reproducción de la fuerza de trabajo argentina en perspectiva histórica (2018)
Error detection and management in CAN XR; ; ;
in 2018 14th IEEE International Workshop on Factory Communication Systems (WFCS) (2018)
DVC‐based image subtraction to detect microcracking in lightweight concrete; ; ;
in Strain (2018), 54
The influence of fracture geometry variation on non-Darcy flow in fractures under confining stresses; ; ; ; ;
in International Journal of Rock Mechanics and Mining Sciences (2018), 113
Efficient Implementation of the SHA-512 Hash Function for 8-bit AVR Microcontrollers; ;
in Lanet, Jean-Louis; Toma, Cristian (Eds.) Innovative Security Solutions for Information Technology and Communications, 11th International Conference, SecITC 2018, Bucharest, Romania, November 8-9, 2018, Revised Selected Papers (2018, November)
Impact of the height imperfections of masonry blocks on the load bearing capacity of dry-stack masonry walls; ;
in Journal of Construction and Building Materials (2018), 165
Development of an innovative type of shear connector dedicated to fully embedded steel-concrete composite columns - experimental and numerical investigations; ; ; ; ;
in Proceedings of the ASCCS 2018 Conference, Valencia, Spain, June 27-29, 2018 (2018, June)
A comparison between discrete analysis and a multiphase approach for predicting heat conduction in packed beds; ;
in Proceedings of the 10th International Conference on Computer Modeling and Simulation (2018)
A Discrete-Continuous Method for Predicting Thermochemical Phenomena in a Cement Kiln and Supporting Indirect Monitoring; ;
in Engineering Journal (2018), 22(6), 165-183
Industry 4.0 – Implementation of an automated assembly line in a wooden modular house production plant: The case Leko Labs; ;
in De vincenzo, Vincenzo; Hichri, Bassem; Plapper, Peter (Eds.) Robotix-Academy Conference for Industrial Robotics (RACIR) 2018 (2018, November)
Model predictive cooperative localization control of multiple UAVs using potential function sensor constraints; ; ; ;
in Autonomous Robots (2018)
Collision Avoidance Effects on the Mobility of a UAV Swarm Using Chaotic Ant Colony with Model Predictive Control; ; ; ; ; ;
in Journal of Intelligent and Robotic Systems (2018)
Identifizierung von Optimierungspotenzialen bei Kläranlagen mit Faulung; ; ; ; ;
in Wasser und Abfall (2018), 4
Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia; ; ; ;
in Advances in Space Research (2018)
A new method to assess the stiffness and rotation capacity of composite joints; ;
in Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018 (2018)
Finite Size Effects in Highly Scaled Ruthenium Interconnects; ; ;
in IEEE Electron Device Letters (2018)
The Deformation Area Difference (DAD) method for condition assessment of reinforced structures; ; ;
in Engineering Structures (2018), 155
Static load deflection experiment on a beam for damage detection using the Deformation Area Difference Method; ;
Scientific Conference (2018, October)
Geophysical Investigation of the Pb–Zn Deposit of Lontzen–Poppelsberg, Belgium; ; ; ; ; ;
in Minerals (2018), 8(6 233),
An exploratory study on the use of new design methods in design consultancies; ; ;
in Proceedings of the International Design Conference - DESIGN 2018 (2018, May)
Augmented Reality-based human-robot Interaction Method: ARBI; ;
in Robotix Academy Conference for Industrial Robotics (RACIR 2018) (2018, June)
A survey: The usage of Augmented Reality in Industry; ;
in Robotix-Academy Conference for Industrial Robotics 2018 (2018, November 01)
Cyber Security and Vulnerability Analysis of Networked Control System subject to False-Data injection; ; ;
in Proceedings of the 2018 American Control Conference (2018, June 27)
Vulnerability Analysis of Cyber Physical Systems under False-Data injection and disturbance attacks; ; ;
in Vulnerability Analysis of Cyber Physical Systems under False-Data injection and disturbance attacks (2018, September)
Staging design thinking for sustainability in practice - guidance and watch-outs; ;
in König, Ariane (Ed.) Sustainability Science (2018)
EU Energy Law Vol. III,Renewable Energy in the member states of the EU, Chapter 17 Luxemburg;
in Greger, Manfred; Benito, Patricia (Eds.) EU Energy Law Vol. III, Renewable Energy in the member states of the EU, Chapter 17 Luxemburg (2018)
Analysis of carbohydrate degradation during fermentation by an adapted Anthron-method; ;
in Landtechnik (2018), 73(3), 81-94
Knowledge Graph-based Teacher Support for Learning Material Authoring; ; ;
in Advances in Computing - CCC 2018 (2018, September 26)
SoLeMiO: Semantic Integration of Learning Material in Office; ; ;
in Proceedings of E-Learn: World Conference on E-Learning in Corporate, Government, Healthcare, and Higher Education 2018 (2018, October 15)
Mensch-Roboter-Kollaboration für Demontageprozesse; ;
in Smajic, Hasan (Ed.) AALE 2018 Das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtscha 15. Fachkonferenz (2018, March 02)
Adaptive multi-patch isogeometric analysis based on locally refined B-splines; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2018), 339
Multi-inclusions modeling by adaptive XIGA based on LR B-splines and multiple level sets; ; ; ; ;
in Finite Elements in Analysis and Design (2018), 148
Simple and extensible plate and shell finite element models through automatic code generation tools; ; ;
in Computers and Structures (2018), 209
Using higher-order adjoints to accelerate the solution of UQ problems with random fields; ;
Poster (2018, January 08)
Verbundtragwerke aus Stahl und Beton, Bemessung und Konstruktion - Kommentar zu DIN EN 1994-1-1; ;
in Kuhlmann, Ulrike (Ed.) Stahlbaukalender 2018 (2018)
Uncertainty Quantification in Finite Element Models:Application to SoftTissue Biomechanics; ; ; ; ;
Scientific Conference (2018, July 23)
Quantifying the uncertainty in a hyperelastic soft tissue model with stochastic parameters; ; ;
in Applied Mathematical Modelling (2018), 62
BioTOOL - a Readily and Flexible Biogas Rate Prediction Tool for End_users; ; ;
in Environmental Modeling & Assessment (2018)
A Reference Architecture for Deploying Component-based Robot Software and Comparison with Existing Tools; ;
in Proceedings of the IEEE International Conference on Robotic Computing (2018)
Skew-symmetric Nitsche’s formulation in isogeometric analysis: Dirichlet and symmetry conditions, patch coupling and frictionless contact; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2018), 341
Determination of process-dependent rheological properties of fresh concrete during setting using a suspension/phase-field model;
Scientific Conference (2018, June)
Phase-field predictive model for setting of fresh self-compacting concrete;
Scientific Conference (2018, March)
Phase-field predictive model for setting of fresh self-compacting concrete;
in Proceedings in Applied Mathematics and Mechanics (2018), 18(1),
Comparison of Several RANS Modelling for the Pavia TRIGA Mark II Research Reactor; ; ; ;
in Journal of Nuclear Engineering and Radiation Science (2018)
Development of a Data-Driven Approach based on Kalman filtering for CFD Reactor Analysis; ; ; ;
in PHYSOR 2018 (2018)
Margins lead to overcapacity; ;
in Proceedings of the International Design Conference - DESIGN 2018 (2018, May)
Recent Progress Toward Intelligent Robot Assistants for Non-Destructive Disassembly; ;
in Müller, Rainer; Plapper, Peter; Brüls, Olivier; Gerke, Wolfgang; Abba, Gabriel; Vette-Steinkamp, Matthias; Hichri, Bassem (Eds.) Robotix-Academy Conference for Industrial Robotics (RACIR) 2018 (2018)
Combining Virtual and Robot Assistants - A Case Study about Integrating Amazon's Alexa as a Voice Interface in Robotics; ; ;
in Müller, Rainer; Plapper, Peter; Brüls, Oliver; Gerke, Wolfgang; Abba, Gabriel; Vette-Steinkamp, Mattihas (Eds.) Robotix-Academy Conference for Industrial Robotics (RACIR) 2018 (2018)
Bonded Particle Model for Numerical Analysis of Concrete Fracture under Impact Loading;
Scientific Conference (2018, July 04)
Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Theory;
E-print/Working paper (2018)
FLEXCAP – Cost competitive flexible process for highly aesthetic closures manufacturing; ;
in Kakogiannos, Ioannis; Hichri, Bassem; Plapper, Peter (Eds.) Robotix-Academy Conference for Industrial Robotics (RACIR) 2018 (2018, November)
Concrete-Filled Steel Tubular (CFTS) Columns Subjected to Eccentric Compressive Load;
in AIP Conference Proceedings (2018, November 15)
Was wissen wir über die Osteitis pubis bei Sporttreibenden?; ; ; ;
in Sportverletzung Sportschaden: Organ der Gesellschaft für Orthopadisch-Traumatologische Sportmedizin (2018)
CILAP-Architecture for Simultaneous Position- and Force-Control in Constrained Manufacturing Tasks; ;
in ICINCO 2018 Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics Volume 2 (2018, July)
Learning-While Controlling RBF-NN for Robot Dynamics Approximation in Neuro-Inspired Control of Switched Nonlinear Systems; ;
in Artificial Neural Networks and Machine Learning; ICANN 2018 part 3 (2018)
Statistical significance of trends in Zenith Wet Delay from re-processed GPS solutions; ; ; ; ;
in GPS Solutions (2018)
Classification of states and model order reduction of large scale Chemical Vapor Deposition processes with solution multiplicity; ; ; ;
in Computers and Chemical Engineering (2018), 121
Descripción del comercio internacional utilizando un modelo de redes complejasin Conferencia Latinoamericana sobre Uso de R en Investigación + Desarrollo (LatinR 2018)-JAIIO 47 (CABA, 2018) (2018)
Reproducción de la fuerza de trabajo en argentina: análisis comparativo respecto de estados unidos y europa (2003–2013)in Kennedy, Damian (Ed.) Debates en torno a las condiciones actuales de reproducción de la fuerza de trabajo argentina en perspectiva histórica (2018)
Push-out tests on demountable shear connectors of steel-concrete composite structures; ; ; ;
in Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures (2018, June 27)
Multiline holding based control for lines merging to a shared transit corridor; ; ; ;
in Transportmetrica B: Transport Dynamics (2018)
Real time multiline holding control for networks with shared transit corridor; ; ; ;
Scientific Conference (2018, September 05)
Improving Public Transport Service Regularity using Cooperative Driver Advisory Systems; ;
Presentation (2018, June 12)
Towards Optimised Deployment of Electric Bus Systems with On-Route Charging using Cooperative ITS; ;
Scientific Conference (2018, July)
The elastic properties of composites reinforced by a transversely isotropic random fibre-network; ; ; ;
in Composite Structures (2018), 208
The promise of solution-processed Fe2GeS4 thin films in iron chalcogenide photovoltaics; ; ; ; ; ; ;
in Journal of Materials Science (2018)
A Simple Engineering Soil Surface Vibration Prediction Method;
in Civil Engineering Research Journal (2018), 4(2),
Multiscale Modeling of Discrete Mesomodels for Dry-Woven Fabrics; ;
Scientific Conference (2018, March)
Verlet buffer for broad phase interaction detection in Discrete Element Method; ; ;
Poster (2018, September 24)
Hybrid MPI+OpenMP Implementation of eXtended Discrete Element Method; ; ; ;
in Proc. of the 9th Workshop on Applications for Multi-Core Architectures (WAMCA'18), part of 30th Intl. Symp. on Computer Architecture and High Performance Computing (SBAC-PAD 2018) (2018, September)
Knowledge Graph-based Core Concept Identification in Learning Resources; ; ;
in 8th Joint International Conference, JIST 2018, Awaji, Japan, November 26–28, 2018, Proceedings (2018, December)
Eight key strategies for successful stakeholder involvement in design; ; ;
in Proceedings of the International Design Conference - DESIGN 2018 (2018, May)
Robotix-Academy Conference for Industrial Robotics (RACIR) 2018; ; ; ; ; ;
Book published by Shaker Verlag - 1st ed (2018)
RapidRMSD: Rapid determination of RMSDs corresponding to motions of flexible molecules; ; ; ; ; ; ;
in Bioinformatics (2018)
A Phase field method for modeling anodic dissolution induced stress corrosion crack propagation; ; ; ; ; ; ; ;
in Corrosion Science (2018), 132
Modelling of inter- and transgranular stress corrosion crack propagation in polycrystalline material by using phase field method; ; ; ; ;
in Journal of the Mechanical Behavior of Materials (2018), 26
Modelling of early-age complex crack propagation in cement-based materials using phase field method;
in 6th European Conference on Computational Mechanics (2018)
Phase field simulation of early-age fracture in cement-based materials; ;
E-print/Working paper (2018)
Modeling of Complex Microcracking in Quasi-Brittle Materials: Numerical Methods and Experimental Validations; ; ;
in Advances in Multi-Physics and Multi-Scale Couplings in Geo-Environmental Mechanics (2018)
3D meso-scale modelling of foamed concrete based on X-ray Computed Tomography; ; ; ;
in Construction and Building Materials (2018), 188
Deep neural network with high-order neuron for the prediction of foamed concrete strength; ; ;
in Computer-Aided Civil and Infrastructure Engineering (2018)
New mechanical model to predict the load bearing resistance of shear connectors with modern forms of profiled sheeting; ; ; ;
Scientific Conference (2018)
A volume-averaged nodal projection method for the Reissner-Mindlin plate model; ; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2018), 341
Analysis of a masonry block based on lightweight Miscanthus concrete;
in Revue Technique Luxembourgeoise (2018)
The Extented Discrete Element Method (XDEM): An Advanced Approach to Model Blast Furnace; ;
in Iron Ores and Iron Oxide Materials (2018)
Freshwater pearl mussels as a stream water stable isotope recorder; ; ; ; ; ; ;
in Ecohydrology (2018), 11:e2007
Decompositions of the optimal dispatching problem of electric and electric-hybrid buses with energy constraints for Luxembourg City; ; ; ;
Scientific Conference (2018, September)
Application of Value Stream Management to enhance product and information flows in supply chain networks - based on the example of web-based automotive retail business; ;
in Management and Production Engineering Review (2018), 9(2), 13-19
UL HPC Tutorial: Performance engineering - HPC debugging and profilling; ; ; ; ; ;
Presentation (2018, June)
On the performance of an overlapping-domain parallelization strategy for Eulerian-Lagrangian Multiphysics software; ; ; ;
in AIP Conference Proceedings of 15th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM) (2018, July 10)
A co-located partitions strategy for parallel CFD-DEM couplings; ; ;
in Advanced Powder Technology (2018)
A Parallel Multiscale DEM-VOF Method For Large-Scale Simulations Of Three-Phase Flows; ; ;
in Proceedings of ECCM-ECFD 2018 (2018)
A Multiscale DEM-VOF Method for the simulation of three-phase flows;
in International Journal of Multiphase Flow (2018), 99
A Numerical approach for the evaluation of particle-induced erosion in an Abrasive Waterjet focusing tube;
in Powder Technology (2018)
Particle scale modeling of heat transfer in granular flows in a double screw reactor;
in Powder Technology (2018), 335
Tongji-Grace02s and Tongji-Grace02k: high-precision static GRACE-only global Earth's gravity field models derived by refined data processing strategies; ; ; ; ;
in Journal of Geophysical Research. Solid Earth (2018), 123
Adaptive control for a lightweight robotic arm actuated by a Shape Memory Allow wire; ; ; ;
in 16th International Conference on New Actuators, Bremen 25-27 June 2018 (2018, June)
Experimental validation of adaptive control for a Shape Memory Alloy actuated lightweight robotic arm; ; ; ;
in ASME 2018 Conferences on Smart Materials, Adaptive Structures and Intelligent Systems, San Antonio 10-12 September 2018 (2018, September)
Model and parameter identification through Bayesian inference in solid mechanicsDoctoral thesis (2018)
Identifying fibre material parameter distributions with little experimental efforts; ;
Scientific Conference (2018, July 23)
Identifying material parameter distributions of fibers with extremely limited experimental efforts; ;
Scientific Conference (2018, July 22)
Determination of the optimum autofrettage pressure for a complex aluminum valve body; ; ; ; ;
Scientific Conference (2018)
The influence of a thin weak soil layer on the pile bearing capacity.;
in International Conference on Deep Foundations and Ground Improvement, Urbanization and Infrastructure Development: Future Challenges (2018, June 05)
Influence of pubic symphysis stiffness on pelvis stress distribution during single leg stance; ; ;
Poster (2018, July 09)
Finite element analysis of the pelvis including gait muscle forces: an investigation into the effect of rami fractures on load transmission; ; ;
in Journal of Experimental Orthopaedics (2018), 5(33), 1-9
Controllability of transportation networksin Transportation Research. Part B, Methodological (2018), 118
Optimal multi-line bus dispatching at terminals with electric charging scheduling constraints; ; ; ; ;
Scientific Conference (2018, July)
Optimal dispatching of electric and hybrid buses subject to scheduling and charging constraints; ; ; ;
Scientific Conference (2018, November)
Assessing the performance of coordinated predictive control strategies on urban-motorway networks;
in IFAC-PapersOnLine (2018, July), 51(9), 285-290
Vulnerability analysis of network observability in link flow inference problems;
Scientific Conference (2018, January)
Comparing Broad-Phase Interaction Detection Algorithms for Multiphysics DEM Applications; ; ; ; ;
in AIP Conference Proceedings of 15th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM) (2018, July 10)
Entwicklung einer Regelungsstrategie für eine PVT-basierte CO2-Wärmepumpe; ; ; ; ;
in KI - Kälte Luft Klimatechnik (2018), 01-02
Development of a Control Strategy for a PVT-based CO2 Heat Pump; ; ; ;
in Proceedings of 7th International Energy and Sustainability Conference (IESC) (2018)
Modellierung eines PVT-basierten Wärmepumpensystems auf der Basis von CO2 Direktverdampfung; ; ; ; ;
in Proceedings of Deutsche Kälte- und Klimatagung DKV 2018 (2018)
Ecological Advanced Driver Assistance System for Optimal Energy Management in Electric Vehicles; ;
in IEEE Intelligent Transportation Systems Magazine (2018)
Nonlinear Model Predictive Control for Ecological Driver Assistance Systems in Electric Vehicles; ;
in Robotics and Autonomous Systems (2018)
Stochastic Optimum Energy Management for Advanced Transportation Network; ;
in 15th IFAC Symposium on Control in Transportation Systems CTS 2018 (2018, July 19)
Towards trajectory planning from a given path for multirotor aerial robots trajectory tracking; ; ;
in 2018 International Conference on Unmanned Aircraft Systems (ICUAS), Dallas 12-15 June 2018 (2018, June)
Analysis and Comparison of Eurocodes and Chinese codes of Design; ;
in Young Engineers Colloquium Munich 2018 (2018, April 13)
Flachdecken in Verbundbauweise Bemessung und Konstruktion von Slim-Floor-TrägernScientific Conference (2018, June 22)
Slim-Floor Beams - application of shallow floor constructions;
Scientific Conference (2018, June 28)
Flachdecken in Verbundbauweise - Bemessung und Konstruktion von Slim-Floor Trägern; ;
in Kuhlmann, Ulrike (Ed.) Stahlbaukalender 2018 (2018)
Design according to Eurocode 4 and special aspects;
Conference given outside the academic context (2018)
Kommentar zu DIN EN 1994-1-1, Verbundtragwerke aus Stahl und BEton;
Scientific Conference (2018, June 22)
Entwicklung der zweiten Generation des Eurocodes 4 - Neuerungen in der Bemessung für Verbundtragwerke aus Stahl und Beton;
Scientific Conference (2018, October 11)
Particularities for plastic design of composite beams with deep plastic neutral axis;
in 12th Japanese-German Bridge Symposium (2018, September 04)
AVEC BNT - Analysis and Comparison of European and Chinese Design Codes - B. Script & Examples; ; ; ; ; ; ; ; ; ;
Book published by BNT (2018)
Influence of laser parameter on weld bead shape and process stability of laser welded steel sheets;
in Proceedings of 10th Conference on Photonic Technologies LANE 2018 (2018)
Metallographic Studies of Dissimilar Al-Cu Laser-Welded Joints Using Various Etchants; ;
in Metallography, Microstructure, and Analysis (2018)
Composition and phases in laser welded Al-Cu joints by synchrotron x-ray microdiffraction; ; ; ; ;
in Proceedings of 10th CIRP Conference on Photonic Technologies [LANE 2018] (2018)
LEXU II „Low Exergy Wall & Air Tempering for Building Refurbishment“;
Scientific Conference (2018, April 20)
Modellierung und Validierung von Simulationsansätzen für die aussenliegende Lufttemperierung; ; ; ;
in Tagungsband BauSim 2018 (2018, September)
Außenliegende Wandtemperierung. Praktische Umsetzung anhand eines Demonstrationsgebäudes und Ermittlung der Systemkosten.; ; ; ; ;
in Bauphysik (2018), 40(4), 187-202
Modeling of a prestressed concrete bridge with 3D finite elements for structural health monitoring using model updating techniques; ; ; ;
in ISMA2018 International Conference on Noise and Vibration Engineering (2018)
Two-Stage Process - a More Flexible Power Production of Biogas; ; ;
in Revue Technique Luxembourgeoise (2018), 3
Mesophilic and Thermophilic Anaerobic Digestion of Model Kitchen Waste with Variation of Fat Content; ;
in Mesophilic and Thermophilic Anaerobic Digestion of Model Kitchen Waste with Variation of Fat Content (2018, October)
Präsentation: Vergleich der anaeroben Vergärung von realem und synthetischem Küchenabfall in Batchversuchen unterschiedlicher Beladung; ;
Scientific Conference (2018, September 13)
Presentation: "Mesophilic and Thermophilic Anaerobic Digestion of Model Kitchen Waste with Variation of Fat Content"; ;
Scientific Conference (2018, October 15)
Vergleich der anaeroben Vergärung von realem und synthetischem Küchenabfall in Batchversuchen unterschiedlicher Beladung; ;
in Chemie Ingenieur Technik (2018), 90(9), 1160
The effect of workplace relocation on individuals’ activity travel behavior;
in Journal of Transport and Land Use (2018), 11(1),
Failure behaviour of silicone adhesive in bonded connections with simple geometry; ;
in International Journal of Adhesion and Adhesives (2018), 82
Structural shape optimization by IGABEM and particle swarm optimization algorithm; ; ; ;
in Engineering Analysis with Boundary Elements (2018), 88
Linear smoothed extended finite element method for fatigue crack growth simulations; ; ;
in Engineering Fracture Mechanics (2018), 206
Vertical Land Movements and Sea Level Changes around South Georgia Island; ; ; ; ; ; ; ;
Poster (2018, April 09)
A Mathematical Model and a Firefly Algorithm for an Extended Flexible Job Shop Problem with Availability Constraints; ;
in 17th International Conference on Artificial Intelligence and Soft Computing, Zakopane, Poland, June 3-7, 2018 (2018, June)
Comparative Study of Genetic and Discrete Firefly Algorithm for Combinatorial Optimization;
in 33rd ACM/SIGAPP Symposium On Applied Computing, Pau, France, April 9 - 13, 2018 (2018, April)
An Extended Flexible Job Shop Scheduling Problem with Parallel Operations;
in ACM SIGAPP Applied Computing Review (2018), 18(2), 46-56
An Imperialist Competitive Algorithm for a Real-World Flexible Job Shop Scheduling Problem; ;
in 23rd IEEE International Conference on Emerging Technologies and Factory Automation, Torino, Italy, September 4-7, 2018 (2018, September)
Assessment of the suitability of gravel wash mud as raw material for the synthesis of an alkali-activated binder; ; ;
in Applied Clay Science (TOP10 Journal in Mineralogy) (2018), 161(C), 110-118
Using Passive Data Collection Methods to Learn Complex Mobility Patterns: An Exploratory Analysis; ; ;
Scientific Conference (2018)
A New Modelling Framework over Temporal Graphs for Collaborative Mobility Recommendation Systems; ; ; ; ;
in A New Modelling Framework over Temporal Graphs for Collaborative Mobility Recommendation Systems (2018, March 15)
SK-DSSy: how to integrate the YouTube platform in a cooperative decision support?;
Book published by Springer Science & Business Media B.V. - ICDSST 2018. Lecture Notes in Business Information Processing, vol 313. Springer, Cham (2018)
Numerical study on the load bearing capacity of a steel U section beam used as a formwork in constrcution stage; ; ;
Scientific Conference (2018, September 05)
The bearing capacity of shallow foundations on slopesin Proceedings of NUMGE 2018 9th European Conference on Numerical Methods in Geotechnical Engineering (2018, June)
The failure mechanism of pile foundations in non-cohesive soilsin Proceedings of NUMGE 2018 9th European Conference on Numerical Methods in Geotechnical Engineering (2018, June)
Numerical check of the Meyerhof bearing capacity equation for shallow foundationsin Innovative Infrastructure Solutions (2018), 3(9), 1-13
Dutch field tests validating the bearing capacity of Fundex piles; ; ; ;
in Proceedings of CPT’18 – International Symposium on Cone Penetration Testing (2018, June)
Recent Advances on GNSS Multipath Reflectometry (GNSS-MR) for Sea and Lake Level Studies; ; ;
Scientific Conference (2018, December)
Is A Vertical Flow Constructed Wetland A Suitable Polishing Treatment For Micropollutant Removal In Medium-sized WWTPs? A Case Of Study;
in 16th IWA Wetland System for Water Pollution Control, ICWS2018 (2018)
h- and p-adaptivity driven by recovery and residual-based error estimators for PHT-splines applied to time-harmonic acoustics; ; ; ;
in Computers and Mathematics with Applications (2018), 77(9), 2369-2395
Numerical evaluation of the plastic hinges developed in headed stud shear connectors in composite beams with profiled steel sheeting; ;
in Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures (2018)
A short review on alkali-activated binders and geopolymer binders;
in Pahn, Matthias; Thiele, Catherina; Glock, Christian (Eds.) Vielfalt im Massivbau - Festschrift zum 65. Geburtstag von Prof. Dr. Ing. Jürgen Schnell (2018)
Basic mechanical behaviours and deterioration mechanism of RC beams under chloride-sulphate environment; ;
in Construction and Building Materials (2018)
Robust Online Obstacle Detection and Tracking for Collision-free Navigation of Multirotor UAVs in Complex Environments; ;
in 15th International Conference on Control, Automation, Robotics and Vision (ICARCV), Singapore 18-21 November 2018 (2018)
In Situ Strain and Damage Monitoring of GFRP Laminates Incorporating Carbon Nanofibers under Tension; ; ; ; ;
in Polymers (2018)
A new thickness-based accelerated aging test methodology for resin materials: theory and preliminary experimental study; ; ; ; ;
in Construction and Building Materials (2018)
Properties and mechanisms of self-sensing carbon nanofibers/epoxy composites for structural health monitoring; ; ; ; ;
in Composite Structures (2018), 200
Strain monitoring of concrete components using embedded carbon nanofibers/epoxy sensors; ; ; ; ;
in Construction and Building Materials (2018)
Strain and Damage Self-Sensing of BFRP Laminates Fabricated with CNFs/Epoxy Composites under Tension; ; ; ; ;
in Composites. Part A, Applied Science and Manufacturing (2018)
Alkali treatments of Cu(In,Ga)Se2 thin‐film absorbers and their impact on transport barriers; ; ; ; ; ; ; ; ; ; ;
in Progress in Photovoltaics (2018)
A method for function integrity diagnosis and documentation: FIDD; ; ;
in Proceedings of the International Design Conference - DESIGN 2018 (2018, May)
Upcycling polymers: a revolutionary approach to promoting the circular economy;
in Impact (2018), 2018(Number 9), 103-1053
The effect of liquid bridge model details on the dynamics of wet fluidized beds; ;
in AIChE Journal (2018), 64(2), 437-456
Constructing IGA-suitable planar parameterization from complex CAD boundary by domain partition and global/local optimization; ; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2018), 328
Adaptive Isogeometric analysis for plate vibrations: An efficient approach of local refinement based on hierarchical a posteriori error estimation; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2018), 342
Comparison of design for composite columns in steel and concrete according to Eurocode 4 and Chinese design codes;
in Romero, Manuel (Ed.) Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2018) (2018, June 27)
Comparison of design for steel and concrete beams according to EN 1994-1-1 and Chinese JGJ138-2016;
Scientific Conference (2018, March 06)
Comparison of Eurocodes and the Chinese standards - Design basics and Design of Composite structure;
Presentation (2018, August 31)
Comparison of Eurocodes and the Chinese standards - Design basics and Design of Composite structure ;
Presentation (2018, August 30)
Comparison of Design Codes for Composite Beams of Steel and Concrete in Europe and China; ;
in 12th Japanese-German Bridge Symposium (2018, September 04)
An investigation of condensation process at COSMEA test facility with ATHLET code; ; ;
in Kerntechnik (2018), 83(3), 208-214
Investigation of Thermal Coupling in Condensation Process at COSMEA Facility with ATHLET Code; ;
in Reactor engineering (2018, October)
Hysteretic behaviour of steel fibre RC coupled shear walls under cyclic loads: Experimental study and modelling; ; ; ; ; ;
in Engineering Structures (2018)
Analysis of FSI-driven energy harvesting devices using parameterised reduced-order models;
Scientific Conference (2018, June)
Modelling and analysis of flow-driven energy harvesting devices and associated reduced order models;
Scientific Conference (2018, June)
2017
Innovation highway: Breakthrough milestones and key evelopments in chalcopyrite photovoltaics from a retrospective viewpoint; ; ; ; ; ; ; ; ; ;
in Thin Solid Films (2017), 633
Stable 3D XFEM/vector-level sets for non-planar 3D crack propagation and comparison of enrichment schemes; ; ;
in International Journal for Numerical Methods in Engineering (2017)
Influence of laser ablation and plasma surface treatment on the joint strength of laser welded aluminum-polyamide assemblies; ; ; ; ; ;
Scientific Conference (2017, September 14)
Real-time graph-based SLAM in unknown environments using a small UAV; ;
in 2017 International Conference on Unmanned Aircraft Systems (ICUAS); Miami 13-16 June 2017 (2017)
A Scalable Parallel Cooperative Coevolutionary PSO Algorithm for Multi-objective Optimization; ; ;
in Journal of Parallel and Distributed Computing (2017)
Micro-structured materials: inhomogeneities and imperfect interfaces in plane micropolar elasticity, a boundary element approach; ; ; ;
in Engineering Analysis with Boundary Elements (2017), 83
NASA-FDL Artificial Intelligence in Planetary Science; Lunar Resource MissionScientific Conference (2017, December 15)
Investigating Multiphase flow Behavior in Trickle Bed Reactors using eXtended Discrete Element Method (XDEM);
Scientific Conference (2017, May 08)
Preliminary investigation on the capability of eXtended Discrete Element method for treating the dripping zone of a blast furnace;
in ISIJ International (2017), 58(1),
Resolving Multiphase Flow through Packed Bed of Solid Particles Using eXtended Discrete Element Method with Porosity Calculation;
in Industrial and Engineering Chemistry (2017)
Model Study of Multiphase Flow Through Packed Particles by eXtended Discrete Element Method (XDEM); ;
Scientific Conference (2017, June 20)
A CFD–DEM approach coupled with heat transfer for the melting process of a packed of particles; ;
Scientific Conference (2017, September 28)
Coupled CFD-DEM with Heat and Mass transfer to Investigate the Melting of a Granular Packed Bed; ;
in Chemical Engineering Science (2017)
Reduced basis Nitsche-based domain decomposition: a biomedical application; ; ;
Scientific Conference (2017, March 10)
An equation-free multiscale method applied to discrete networks;
Scientific Conference (2017, June 06)
An equation-free multiscale method: a result of extending the quasicontinuum method to irregular structures;
Scientific Conference (2017, July 16)
Influence of the substrate to inoculum ratio on process stability and performance during batch digestion of grass silage;
in Chemie Ingenieur Technik (2017), 89
Production of bio-hydrogen and methane during semi-continuous digestion of maize silage in a two-stage system; ;
in International Journal of Hydrogen Energy (2017), 42
Chapter 4:A Survey on The Polytopic Takagi-Sugeno Approach: Application to the Inverted Pendulum; ;
in The Inverted Pendulum: From Theory to New Innovations in Control and Robotics (2017)
A contribution to Cyber-Security of Networked Control Systems: an Event-based Control Approach; ;
in Proceedings of 2017 3rd International Conference on Event-Based Control, Communication and Signal Processing (EBCCSP 2017) (2017, May)
A New Polytopic Approach for the Unknown Input Functional Observer Design; ;
in International Journal of Control (2017)
Observer-based Event-triggered Attack-Tolerant Control Design for Cyber-physical Systems; ;
in 14th International Workshop on Advanced Control and Diagnosis, Bucharest, Romania, November 2017 (2017, November)
On the Unknown Input Functional Observer Design via Polytopic Lyapunov Function: Application to a Quadrotor Aerial Robots Landing; ;
in IFAC-PapersOnLine (2017, July)
Unknown Input Functional Observers Design for Polytopic Discrete Time Systems; ;
in Proceedings of 6th IEEE International Conference on Systems and Control (ICSC) 2017 (2017, May)
Optimized event notification in CAN through in-frame replies and Bloom filters; ; ; ;
in 2017 IEEE 13th International Workshop on Factory Communication Systems (WFCS) (2017)
Supporting Security Protocols on CAN-Based Networks; ; ; ;
in 2017 IEEE 18th International Conference on Industrial Technology (ICIT2017) (2017)
Advances in enriched finite element formulations for fracture and cutting: engineering and surgical simulation applicationsScientific Conference (2017, June 21)
Discretisation and Model Selection for Interface Problems in Mechanicsin International Journal of Computational Methods (2017, August 04)
An implicit potential method along with a meshless technique for incompressible fluid flows for regular and irregular geometries in 2D and 3D; ; ; ; ;
in Engineering Analysis with Boundary Elements (2017), 77
Numerical simulation of the load bearing behaviour of concrete dowels in slim-floor construction – CoSFB; ;
in Eurosteel 2017 (2017, September 13)
Real-time Error Control for Surgical Simulation: Application to Percutaneous Interventions; ; ; ;
Presentation (2017, August)
Ultimate strengths of FRC rectangular columns subjected to simulated seismic loading: Experimental database and new models;
in Archives of Civil and Mechanical Engineering (2017)
Effect of Infills on Seismic Performance of Reinforced Concrete Frame structures—A Full-Scale Experimental Study;
in Journal of Earthquake Engineering (2017)
Simplified density indexes of walls and tie-columns for confined masonry buildings in seismic zones; ; ;
in Journal of Earthquake Engineering (2017)
Effectiveness of the Two-Step Dynamic Demand Estimation model on large networks; ;
in Proceedings of 2017 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS) (2017, June 28)
New methodology for designing direct-laser-sintered motorcycle frame based on combination of topology optimization and lattice implementation;
Scientific Conference (2017, February 07)
NEW METHODOLOGY FOR DESIGNING DIRECT-LASER-SINTERED MOTORCYCLE FRAME BASED ON COMBINATION OF TOPOLOGY OPTIMIZATION AND LATTICE IMPLEMENTATION;
in International Journal of Mechanical Engineering (2017), 6(3), 39-50
Evasive Maneuvering for UAVs: An MPC Approach; ;
in ROBOT'2017 - Third Iberian Robotics Conference, Sevilla, Spain, 2017 (2017, November 22)
Contribuciones al debate sobre el rol del salario real en la acumulación de capital en Argentina. Evidencias de la venta de la fuerza de trabajo por debajo de su valor; ; ; ;
in CICLOS EN LA HISTORIA, LA ECONOMIA Y LA SOCIEDAD (2017), 26(47),
CAN With eXtensible In-Frame Reply: Protocol Definition and Prototype Implementation; ; ;
in IEEE Transactions on Industrial Informatics (2017), 13(5), 2436-2446
Observation and Control of Anaerobic Digestion Processes for Improved Biogas ProductionDoctoral thesis (2017)
An LMI-Based H_infty Discrete-Time Nonlinear State Observer Design for an Anaerobic Digestion Model;
in World Congress of the International Federation of Automatic Control, Toulouse 9-14 July 2017 (2017, July)
LMI-Based Discrete-Time Nonlinear State Observer for an Anaerobic Digestion Model; ; ; ;
in IEEE International Conference on Systems and Control, Batna 7-9 May 2017 (2017, May)
LMI-Based H_infty Nonlinear State Observer Design for Anaerobic Digestion Model; ; ; ;
in IEEE Mediterranean Conference on Control and Automation, Valletta 3-6 July 2017 (2017, July)
Effet des imperfections géométriques des blocs de maçonneries sur la descente de charge dans un mur monté à sec;
Presentation (2017, May 19)
Development of an innovative type of shear connection dedicated to the composite columns application; ;
Poster (2017, September 13)
Shear Stresses Analysis at the Steel-Concrete Interface with the Usage of Bond Eliminating Products; ; ;
in Proceedings of the XI CMM 2017 Conference, Coimbra 23-24 November 2017 (2017, November)
A Low-Overhead Framework for Inexpensive Embedded Control Systems; ;
in Proc. 12th International Conference on Digital Telecommunications (ICDT2017) (2017)
Model-based design languages: A case study; ;
in 2017 IEEE 13th International Workshop on Factory Communication Systems (WFCS) (2017)
Equilibrium models in multimodal container transport systems; ;
in Flexible Services and Manufacturing Journal (2017), 29
Model-Driven Interaction Design for Social Robots; ;
in 4th International Workshop on Model-driven Robot Software Engineering, Marburg, Germany, 2017 (2017, December)
A Perspective of Security for Mobile Service Robots; ; ; ; ; ;
in Iberian Robotics Conference, Seville, Spain, 2017 (2017, November 22)
Design guidelines for highly glazed office buildings in steel composite construction developed by using Trnys, optimization methods and LCA;
Scientific Conference (2017, March 01)
Retrieving hydrological connectivity from empirical causality in karst systems; ; ; ; ; ; ;
Scientific Conference (2017)
Numerical evaluation of buckling behaviour induced by compression on patch-repaired composites; ; ; ;
in Composite Structures (2017), 168
Implementation and validation of an event-based real-time nonlinear model predictive control framework with ROS interface for single and multi-robot systems; ; ;
in 2017 IEEE Conference on Control Technology and Applications (CCTA) (2017, August 30)
How Mobile Phone Handovers reflect Urban Mobility: A Simulation Study; ; ;
in Proceedings of the 5th IEEE Conference on Models and Technologies for Intelligent Transportation Systems. (2017, June 26)
Estimating Urban Road Traffic States Using Mobile Network Signaling Data; ; ;
in Abstract book of the 20th International Conference on Intelligent Transportation Systems (2017, October)
A finite element model of the lower limb during stance phase of gait cycle including the muscle forces; ; ; ;
in BioMedical Engineering OnLine (2017), 16(138),
Static and fatigue strength of a novel anatomically contoured implant compared to five current open-wedge high tibial osteotomy plates; ; ; ;
in Journal of Experimental Orthopaedics (2017), 4(39),
Mechanical strength assessment of a drilled hole in the contralateral cortex at the end of the open wedge for high tibial osteotomy.; ; ;
in Journal of Experimental Orthopaedics (2017), 4(1),
Numerical comparative study of five currently used implants for high tibial osteotomy: realistic loading including muscle forces versus simplified experimental loading; ; ; ; ; ; ;
in Journal of Experimental Orthopaedics (2017), 5(28),
An evaluation of real-time troposphere estimation based on GNSS Precise Point Positioning; ; ; ;
in Journal of Geophysical Research: Atmospheres (2017), 122(5), 2779--2790
An Evaluaton of Real-Time Troposphere Products Based on mult-GNSS Precise Point Posi)oning; ; ; ;
Scientific Conference (2017, February 21)
Experimental investigations on semi-continuous encased composite joints; ;
in Eurosteel 2017 (2017, September 13)
On the integration of product and process models in engineering design; ; ; ; ; ; ; ; ;
in Design Science (2017), 3
A DSM-based Framework for Integrated Function Modelling: Concept, Application and Evaluation; ; ;
in Research in Engineering Design (2017), 28(1), 25-51
Krümmungsbasierte Methode zur lokalen Schadensdetektion von Brückenkonstruktionen;
Presentation (2017, September)
Laboratory experiment for damage assessment using the DAD-method; ;
in Conference proceedings SMAR 2017 (2017, September)
CrowdSenSim: a Simulation Platform for Mobile Crowdsensing in Realistic Urban Environments; ; ; ; ; ; ; ;
in IEEE Access (2017)
Molecular Seesaw: Intricate Dynamics and Versatile Chemistry of Heteroaromatics on Metal Surfaces; ;
in The Journal of Physical Chemistry Letters (2017), 8
Through the Spherical Looking-Glass: Asymmetry Enables Multicolored Internal Reflection in Cholesteric Liquid Crystal Shells; ; ; ; ;
in Advanced Optical Materials (2017), 6(1), 1700923
What do we need to say about a design method?; ;
in Proceedings of the 21st International Conference on Engineering Design (2017, August)
The Integrated Function Modelling Framework and its Relation to Function Structures;
in AI EDAM: Artificial Intelligence for Engineering Design Analysis and Manufacturing (2017), 3(31),
Experimental analysis of eGLOSA and eGLODTA transit control strategies; ; ; ;
in Proceedings of the 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems, MT-ITS 2017 (2017)
Human-Robot-Collaboration for dismantling processes; ;
in Müller, Rainer; Plapper, Peter; Brüls, Olivier; Gerke, Wolfgang; Abba, Gabriel; Hichri, Bassem; Vette-Steinkamp, Matthias (Eds.) Robotix-Academy Conference for Industrial Robotics (RACIR) 2017 (2017, October)
Containers for portable, productive and performant scientific computing; ; ;
in Computing in Science and Engineering (2017)
Einfluss der Regenwasserbehandlung und vorgeschalteter Grobreinigungsverfahren auf das Betriebsergebnis von Feinrechen; ; ;
in Korrespondenz Abwasser Abfall (2017)
Accelerating Monte Carlo estimation with derivatives of high-level finite element models; ;
in Computer Methods in Applied Mechanics and Engineering (2017), 318
Calculating the Malliavin derivative of some stochastic mechanics problems; ;
in PLoS ONE (2017), 12(12), 0189994
Uncertainty Quantification (Monte Carlo methods) - Sensitivity Analysis - Biomechanics; ;
Presentation (2017, September)
Development of a new push test for Eurocode 4; ;
in 8th International Conference on Composite Construction in Steel and Concrete (2017, July 30)
Trefftz polygonal finite element for linear elasticity: convergence, accuracy, and properties; ; ; ;
in Asia Pacific Journal on Computational Engineering (2017)
A Novel Fast Process for Zn(O,S) Buffer Layers, Doped With Al and B and Deposited on CIGSSe Solar Cells; ; ; ; ;
in IEEE Journal of Photovoltaics (2017), 7
Isogeometric analysis of thin Reissner-Mindlin plates and shells: Locking phenomena and generalized local B-bar method; ; ; ; ;
E-print/Working paper (2017)
Towards Seamless Integration of N-Version Programming in Model-Based Design; ;
in 22nd IEEE International Conference on Emerging Technologies And Factory Automation (ETFA’2017), Limassol, Cyprus, September 12-15 2017 (2017)
Numerical prediction of the rheological properties of fresh self-compacting concrete;
Scientific Conference (2017, July 14)
An iterative learning approach for anticipatory traffic signal control on urban networks; ;
in Transportmetrica B: Transport Dynamics (2017), 5(4), 407-430
A Global Vertical Land Movement Data Set from a Combination of Global Navigation Satellite System Solutions; ; ; ; ; ; ; ; ; ; ; ;
Poster (2017, July 13)
On the Scientific Applications of IGS Products: An Assessment of the Reprocessed TIGA Solutions and Combined Products; ; ; ; ; ; ; ; ; ; ;
Scientific Conference (2017, July 03)
Error-controlled adaptive extended finite element method for 3D linear elastic crack propagation; ; ;
in Computer Methods in Applied Mechanics and Engineering (2017), 318
An intelligent agent-controlled and robot-based disassembly assistant; ;
in Conference Proceedings on the 2nd International Conference on Artificial Intelligence and Robotics ( ICAIR 2017) (2017)
Towards Intelligent Robot Assistants for the non-destructive Disassembly of End of Life Products; ;
in Plapper, Peter; Hichri, Bassem (Eds.) Robotix-Academy Conference (2017, May 06)
Multiscale model of sintering: diffusion and plastic flow;
Scientific Conference (2017, September 27)
Hierarchical control of aerial manipulation vehicle; ; ; ; ;
in AIP Conference Proceedings (2017), 1798(1), 020069
Model predictive control for cooperative control of space robots; ; ; ;
in Model predictive control for cooperative control of space robots (2017, January)
Optimal design of cap screw thread runout for transversal and axial loadsin Journal of Applied Mechanical Engineering (2017), 6(1),
Comparative study of reduced-order methods for geometrically nonlinear structuresDoctoral thesis (2017)
Neuro-Inspired Reward-Based Tracking Control for Robotic Manipulators with Unknown Dynamics; ;
in Proceedings of the 2017 2nd International Conference on Robotics and Automation Engineering (ICRAE) (2017, December)
Robust BELBIC-Extension for Trajectory Tracking Control; ;
in Journal of Mechanics Engineering and Automation (2017), 7(2),
PID and Biomimetic Variable Structure Path Tracking Control in Automated Surface Finishing Processes; ;
in Robotix-Academy Conference for Industrial Robotics (RACIR) 2017 (2017)
Noise characteristics in Zenith Total Delay from homogeneously reprocessed GPS time series; ; ; ; ;
Scientific Conference (2017, February 22)
On the combined effect of periodic signals and colored noise on velocity uncertainties; ; ; ;
in GPS Solutions (2017)
A New Synchronization Method for Three - phase Grid - tied LC-Filtered Voltage Source Inverters; ; ;
in International Journal of Emerging Engineering Research and Technology (2017), 5(5), 7-15
An comprehensive and cost-efficient approach in assessing WWTP's degradation performance of xenobiotics; ; ; ; ; ;
in Proceedings of 10th Micropol & Ecohazard Conference 2017 (2017)
Cooperative localization of unmanned aerial vehicles in ROS - The Atlas node; ; ;
in 2017 IEEE 15th International Conference on Industrial Informatics (INDIN) (2017)
Influence of Material Moisture during Laser Joining of Polyamide 6.6 to Aluminum; ;
in Atiner's Conference Paper Series (2017), IND 2017 - 2270
Coordinating merging public transport operations using holding control strategies; ; ;
Scientific Conference (2017, September 12)
Strain smoothed for compressible and nearly-incompressible finite elasticity; ; ; ;
in Computers and Structures (2017), 182
Shear Connections in Composite Flexural Members of Steel and Concrete; ; ; ; ; ; ; ; ; ; ; ; ;
Report (2017)
What makes Data Science different? A discussion involving Statistics2.0 and Computational Sciences;
E-print/Working paper (2017)
On Locating Malicious Code in Piggybacked Android Apps; ; ; ; ; ;
in Journal of Computer Science and Technology (2017)
Annual variations in GPS-measured vertical displacements near Upernavik Isstrøm (Greenland) and contributions from surface mass loading; ; ; ;
in Journal of Geophysical Research: Solid Earth (2017)
Elliptic Curve Cryptography with Efficiently Computable Endomorphisms and Its Hardware Implementations for the Internet of Things; ; ; ; ;
in IEEE Transactions on Computers (2017), 66(5), 773-785
High-Performance Ideal Lattice-Based Cryptography on 8-Bit AVR Microcontrollers; ; ; ; ; ; ; ;
in ACM Transactions on Embedded Computing Systems (2017), 16(4), 117
Untersuchung des thermischen Komforts und der Luftqualität an vier neuen energieeffizienten Luxemburger Schulen mit und ohne Lüftungsanlagen; ; ;
in Bauphysik (2017), 39. Jahrgang
Real time degradation identification of UAV using machine learning techniques; ; ;
in International Conference on Unmanned Aircraft Systems ICUAS. Miami, USA, 2017 (2017, June 13)
Gradient plasticity crack tip characterization by means of the extended finite element method; ;
in Computational Mechanics (2017)
GRACE era variability in the Earth’s oblateness: A comparison of estimates from six different sources; ;
in Geophysical Journal International (2017), 208(2), 1126-1138
Seasonal low-degree changes in terrestrial water mass load from global GNSS measurements; ; ;
in Journal of Geodesy (2017), 91(11), 1329-1350
Conversion analysis of a cylindrical biomass particle with a DEM-CFD coupling approach; ;
in Case Studies in Thermal Engineering (2017), 10
Resistivity scaling in metallic thin films and nanowires due to grain boundary and surface roughness scattering; ;
in Microelectronic Engineering (2017), 167
Robotix-Academy Conference for Industrial Robotics (RACIR) 2017; ; ; ; ; ;
Book published by Shaker Verlag - 1st ed (2017)
Software patterns for fault injection in CPS engineering; ;
in 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (2017)
Short-span composite beam tests to evaluate stud resistances; ; ; ;
in Proceedings of the Institution of Civil Engineers. Structures and Buildings (2017)
Influence of transverse loading onto push-out tests with deep steel decking; ; ;
in Journal of Constructional Steel Research (2017), 128
Regional comparison of absolute gravimeters SIM.M.G-K1 key comparison; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Metrologia (2017), 54(1A), 07019
A Phase field method for modeling stress corrosion crack propagation in a nickel base alloy; ; ; ;
in International Journal of Solids and Structures (2017), 112
Phase field modelling of anisotropic crack propagation; ;
in European Journal of Mechanics. A, Solids (2017), 65
Multi-phase-field modeling of anisotropic crack propagation for polycrystalline materials; ; ;
in Computational Mechanics (2017), 60
A phase field method for modeling stress corrosion crack propagation induced by anodic dissolution; ; ; ;
in 14th International Conference on Fracture (2017)
Modeling inter/trans granular failure using an anisotropic phase field approach; ; ;
in Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (2017)
Large-scale simulations of quasi-brittle microcracking in realistic highly heterogeneous microstructures obtained from micro CT imaging; ; ; ; ;
in Extreme Mechanics Letters (2017), 17
A Study of Temperature and Aging Effects on Eigenfrequencies of Concrete Bridges for Health Monitoring; ; ;
in Engineering (2017), 9
Modelling hydraulic fractures in porous media using flow cohesive interface elements; ; ;
in Engineering Geology (2017), 225
Three-dimensional remeshed smoothed particle hydrodynamics for the simulation of isotropic turbulence;
in International Journal for Numerical Methods in Fluids (2017)
Three-dimensional remeshed smoothed particle hydrodynamics for the simulation of isotropic turbulence;
in INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2017)
Continuous Improvement of complex process flows by means of StreaM; ;
Presentation (2017, December 11)
Continuous Improvement of Complex Process Flows by Means of StreaM as the “Standardized Cross-Enterprise Value Stream Management Method”; ;
in Proceedings of 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (2017, December)
Standardized Value Stream Management Method to Visualize, Analyze and Optimize Cross-Enterprise Value Stream Data; ;
in International Journal of Standardization Research (2017), 15(2), 25-36
Cross-enterprise value stream assessment;
in Journal of Advances in Management Research (2017), 14(2), 182-193
Mechanical Model to Predict the Resistance of the Shear Connection in Composite Beams with Deep Steel Decking;
in Eurosteel 2017 (2017, September 13)
Mechanical model to predict the resistance of the shear connection in composite beams with deep steel decking;
in Steel Construction (2017), 10(3), 248-253
Guaranteed error bounds in homogenisation: an optimum stochastic approach to preserve the numerical separation of scales; ; ;
in International Journal for Numerical Methods in Engineering (2017), 110(2), 103132
Regional comparison of absolute gravimeters, EURAMET.M.G-K2 key comparison; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Metrologia (2017), 54(1A), 07012
Flow characteristics of metallic powder grains for additive manufacturing;
in EPJ Web of Conferences (2017), 13001
Numericl Analysis of the Fluiddynamic Interaction between Carrier Gas and Powder; ;
Scientific Conference (2017, October 11)
Real-time Error Control for Surgical Simulation; ; ; ;
in IEEE Transactions on Biomedical Engineering (2017)
Evaluating Erosion Patterns in an abrasive water jet cutting nozzle using XDEM;
in Advances in Powder Metallurgy & Particulate Materials (2017)
LES-VOF SIMULATIONS OF A PURE WATER JET DEVELOPING INSIDE AN AWJC NOZZLE: PRELIMINARY OBSERVATIONS AND GUIDELINES;
in Proceedings of 2017 WJTA-IMCA (2017)
Multiscale-multiphysics approaches for engineering applications;
in AIP Conference Proceedings (2017), 1863(1), 180001
On the choice of a phase interchange strategy for a multiscale DEM-VOF Method;
in AIP Conference Proceedings (2017), 1863
Fatigue of rocks;
in Johansson, Erik; Raasakka, Ville (Eds.) Proceedings of the 3rd Nordic Rock Mechanics Symposium, NRMS 2017 (2017, November)
Numerical study of particle mixing in a lab-scale screw mixer using the discrete element metod; ;
in Powder Technology (2017), 308
2017 AIChE Annual Meeting;
in Qi, Fenglei; Wright, Mark (Eds.) A DEM modeling of biomass fast pyrolysis in a double screw reactor (2017, October 31)
Operational space control of a lightweight robotic arm actuated by shape memory alloy wires: A comparative study; ; ; ;
in Journal of Intelligent Material Systems and Structures (2017)
Observer design for Lightweight Robotic arm actuated by Shape Memory Alloy (SMA) wire; ; ; ;
in Quintanar Guzman, Serket; Kannan, Somasundar; Voos, Holger; Darouach, Mohamed; Alma, Marouane (Eds.) 14th International Workshop on Advanced Control and Diagnosis, Bucharest, Romania, 16-17 November 2017 (2017)
Methodology for Optimally Sizing a Green Electric and Thermal Eco-Village; ; ;
in Rafii-Tabrizi, Sasan; Hadji-Minaglou, Jean-Régis; Scholzen, Frank; Capitanescu, Florin; Otjacques, Benoît (Eds.) From Science to Society-New Trends in Environmental Informatics (2017)
Effects of adsorptive properties of sludge on engineered nanoparticles (Ag, TiO2, ZnO) during anaerobic digestion process;
in Proceeding of Nanoimpact Conference, Nanomaterial Fate and Speciation in the Environment, Monte Verita 2017 (2017)
Bayesian inference to identify parameters in viscoelasticity; ;
in Mechanics of Time-Dependent Materials (2017)
Monolithic modeling and finite element analysis of piezoelectric energy harvesters;
in Acta Mechanica (2017), 228(6), 2251-2267
Time and frequency domain analysis of piezoelectric energy harvesters by monolithic finite element modeling;
in International Journal for Numerical Methods in Engineering (2017)
Stationary Wavelet Transform for denoising Pulsed Thermography data: optimization of wavelet parameters for enhancing defects detection; ; ; ;
in Quantitative Infra Red Thermography Journal (2017)
Historical overview of CPT-based design methods;
in Proceedings of the International Conference of Civil Engineering, ICCE 2017, Tirana 12-14 October 2017 (2017, October 12)
An advanced approach to design experiments to investigate the biomechanics of the pelvis; ; ;
Scientific Conference (2017)
On characterizing the relationship between route choice behavior and optimal traffic control solution space; ;
in Transportation Research Procedia (2017), 23
On characterizing the relationship between route choice behaviuor and optimal traffic control solution space; ;
in Transportation Research. Part B : Methodological (2017)
A global optimization heuristic for the decomposed static anticipatory network traffic control problem anticipatory network traffic control problem; ;
in Transportation Research Procedia (2017)
Exact and approximate route set generation for resilient partial observability in sensor location problems;
in Transportation Research. Part B : Methodological (2017), 105
Multiscale Modelling of Damage and Fracture in Discrete Materials Using a Variational Quasicontinuum Method; ; ;
Scientific Conference (2017, September 05)
An adaptive variational Quasicontinuum methodology for lattice networks with localized damage; ; ;
in International Journal for Numerical Methods in Engineering (2017), 112(2),
An Enriched Quasi-Continuum Approach to Crack Propagation in Discrete Lattices; ; ;
Scientific Conference (2017, June 14)
eXtended Variational Quasicontinuum Methodology for Modelling of Crack Propagation in Discrete Lattice Systems; ; ;
Scientific Conference (2017, July 17)
Area exploration with a swarm of UAVs combining deterministic Chaotic Ant Colony Mobility with position MPC; ; ; ; ; ;
in 2017 International Conference on Unmanned Aircraft Systems (ICUAS) (2017, July 27)
Silicone sealants: A Finite Fracture Mechanics failure model for non-linear materials; ; ; ;
in 14th International Conference on Fracture (ICF 14) (2017, June)
Parallelizing XDEM: Load-balancing policies and efficiency, a study; ;
Scientific Conference (2017, September)
Nested Graphs: a model to efficiently distribute multi-agent systems on HPC clusters; ; ; ;
in Concurrency and Computation: Practice and Experience (2017), 30(7), 22
Entwicklung einer Regelungsstrategie eines PVT-basierten Wärmepumpensystems auf der Basis von CO2 Direktverdampfung; ; ; ; ;
in Proceedings of Deutsche Kälte- und Klimatagung (DKV) (2017)
Entwicklung eines PVT-basierten CO2- Wärmepumpensystems; ; ; ; ;
in KI - Kälte Luft Klimatechnik (2017), 8-9
Thermal Model of a Solar Hybrid Module as the Heat Source for a CO2 Heat Pump; ; ; ;
in Proceedings of 2017 International Energy and Sustainability Conference (IESC 2016) (2017)
Deadzone-Quadratic Penalty Function for Predictive Extended Cruise Control with Experimental Validation; ;
in ROBOT 2017: Third Iberian Robotics Conference, Sevilla, Spain 22-24 November 2017 (2017, November)
Fast Stochastic Non-linear Model Predictive Control for Electric Vehicle Advanced Driver Assistance Systems; ;
in 13th IEEE International Conference on Vehicular Electronics and Safety, Vienna, Austria 27-28 June 2017 (2017, June 27)
Risk-averse Stochastic Nonlinear Model Predictive Control for Real-time Safety-critical Systems; ;
in The 20th World Congress of the International Federation of Automatic Control, IFAC 2017 World Congress, Toulouse, France, 9-14 July 2017 (2017, July 11)
Bericht zur Tätigkeit des Projectteams CEN/TC250/SC4.T1 - Neuerungen zur Bemessung im VerbundbauPresentation (2017, May 08)
Effiziente Gebäudelösungen in Stahl- und Verbundbauweise - eine Alternative für innerstädtische ProjekteScientific Conference (2017, January 16)
Review of plastic moment resistance for compsite beams - Development of second generation of Eurocode 4in Leon, Roberto (Ed.) 8th International Conference on Composie Structures in Steel and Concrete (2017, July 30)
Stahlverbundkonstruktionen im Hochbau - Entwicklungen in der NormungScientific Conference (2017, March)
Generating Macroscopic, Purpose-Dependent Production Factors Through Monte Carlo Sampling Techniques; ;
in Transportation Research Procedia (2017)
Generating purpose-dependent production factors through Monte Carlo sampling techniques.; ;
Scientific Conference (2017, May)
Resistance measurement of dissimilar Al/Cu laser welds;
in Proceedings of LPM2017 - the 18th International Symposium on Laser Precision Microfabrication (2017)
Resistance Measurement of Laser Welded Dissimilar AlCu Joints;
in Journal of Laser Micro Nanoengineering (2017), 12(3), 189-194
Health Monitoring based on Dynamic Flexibility matrix: Theoretical Models versus in-situ Tests; ; ; ; ; ;
in Engineering (2017), 09(02), 37-67
Model updating for structural health monitoring using static and dynamic measurements; ; ;
in Procedia Engineering (2017), 199
Experimental and numerical assessment of the mechanics of keloid-skin composites undergoing large deformations; ; ; ; ; ; ; ; ; ; ;
Scientific Conference (2017, August)
Novel C-ITS support for Electric Buses with Opportunity Charging;
in Proceedings of IEEE-ITS Conference (2017)
On the consistency between commuting satisfaction and traveling utility: the case of the University of Luxembourg; ;
in European Journal of Transport and Infrastructure Research (2017), 17(2), 248-262
Discussion on cross-border integration using non-dominant mobility flows;
Scientific Conference (2017, April 12)
The effect of workplace relocation on individuals’ activity travel behaviour;
Scientific Conference (2017, July 04)
Proposal of a Failure Criterion of Adhesively Bonded Connections with SiliconeDoctoral thesis (2017)
Application of Variance Analyses Comparison in Seismic Damage Assessment of Masonry Buildings Using Three Simplified Indexes; ;
in Mathematical Problems in Engineering (2017)
Statistical Comparison and Combination of GPS, GLONASS, and Multi-GNSS Multipath Reflectometry Applied to Snow Depth Retrieval; ;
in IEEE Transactions on Geoscience and Remote Sensing (2017), (99),
Sea Level Changes, Monitoring of Vertical Land Movements and TIGA ActivitiesLearning material (2017)
First Vertical Land Movement Estimates on South Georgia Island: An Impact Study on Sea Level Change from Tide Gauge and Altimetry Measurements; ; ; ; ; ; ; ;
Poster (2017, December 11)
Alkali activation of processed gravel wash mud for synthesis of geopolymer;
Presentation (2017, May 19)
Mechanical characterisation of alkali activated clay - based geopolymer binder made out of gravel wash mud; ; ; ; ;
Poster (2017, April 03)
Mechanical characterisation of alkali activated clay - based geopolymer binder made out of gravel wash mud; ; ; ; ;
in Iacobescu, Remus Ion; Malfliet, Annelies (Eds.) Proceedings of the 5th International Slag Valorisation Symposium (2017, April)
Usage of Smartphone Data to Derive an Indicator for Collaborative Mobility between Individuals; ; ; ;
in ISPRS International Journal of Geo-Information (2017), 6(3), 62
Pump Efficiency Analysis of Waste Water Treatment Plants: A Data Mining Approach Using Signal Decomposition for Decision Making; ; ; ;
in Lecture Notes in Computer Science (2017)
A data-driven methodology to support pump performance analysis and energy effiency optimization in wastewater treatment plants; ; ; ; ;
in Applied Energy (2017), 208
Energy saving in wastewater treatment plants: A plant-generic cooperative decision support system; ; ; ; ;
in Journal of Cleaner Production (2017)
A Tool for Energy Management and Cost Assessment of Pumps in Waste Water Treatment Plant; ; ; ; ;
in Data, Information and Knowledge Visualization in Decision Support Systems, 282 (2017)
The axisymetric failure mechanism of circular shallow foundations and pile foundations in non-cohesive soilsin Computations and Materials in Civil Engineering (2017), 2(1), 1-15
Numerical Check of the Meyerhof Bearing Capacity Equation for Shallow Foundationsin Shehata, Hany; Rashed, Youssef (Eds.) Congress and Exhibition on Sustainable Civil Infrastructures (2017, July)
Определение проницаемости органоминеральных грунтов с помощью диссипационных тестов, выполняемых пьезоконом;
in Russian Magazine Geoinfo (2017)
Geophysics From Terrestrial Time-Variable Gravity Measurements; ; ; ; ;
in Reviews of Geophysics (2017), 55
Using GPS and absolute gravity observations to separate the effects of present-day and Pleistocene ice-mass changes in South East Greenland; ; ; ; ;
in Earth and Planetary Science Letters (2017), 459
Design of an Electromechanical Prosthetic Finger using Shape Memory Alloy Wires; ;
in IEEE 5th International Symposium on Robotics and Intelligent Sensors, Ottawa, Canada, 5-7 October 2017 (2017, October)
Lessons learnt from a corporate car-sharing system: the case of the University of Luxembourg;
Scientific Conference (2017, May)
A local dynamic route and green time swapping control algorithm maximizing total network capacity;
in Proceedings of the 25th Mediterranean Conference on Control and Automation, MED 2017 (2017)
Influence of the sheet profile design on the composite action of slabs made of lightweight woodchip concrete; ;
in Construction and Building Materials (2017), 148C(September 2017), 887-899
Designing products and services by considering the meaning-based perspective of potential usersPresentation (2017, September 05)
An engineering approach to mapping meanings in products and services; ; ;
in Maier, Anja; Skec, Stanko; Kim, Harrison; Kokkolaras, Michael; Oehmen, Josef; Fadel, Georges; Salustri, Filippo; Van der Loos, Mike (Eds.) Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 3: Product, Services and Systems Design (2017, August)
A linear smoothed higher-order CS-FEM for the analysis of notched laminated composites; ; ; ;
in Engineering Analysis with Boundary Elements (2017), 85
A linear smoothed quadratic finite element for the analysis of laminated composite Reissner–Mindlin plates; ; ; ;
in Composite Structures (2017), 180
A fully smoothed XFEM for analysis of axisymmetric problems with weak discontinuities; ; ; ;
in International Journal for Numerical Methods in Engineering (2017), 110(3), 203-226
Surface and subsurface continuous gravimetric monitoring of groundwater recharge processes through the karst vadose zone at Rochefort Cave (Belgium); ; ; ; ; ; ; ; ;
Scientific Conference (2017, December)
Entwicklung eines EDV-basierten Frühwarnsystems für die Blankaalabwanderung an der MoselDoctoral thesis (2017)
Dynamic Sintering of a High Temperature Granular Material: Experiments and Simulations; ; ; ;
Scientific Conference (2017, September 26)
3D Printing: The Next 5 years by Claude Wolf – Into the Future engineered by the ZsE-print/Working paper (2017)
UpAM: UPCYCLING VIA ADDITIVE MANUFACTURING – HOW 3D PRINTING CAN ENHANCE CIRCULAR ECONOMY;
in REVUE TECHNIQUE LUXEMBOURGEOISE (2017), 2017(2), 38
Liquid transport rates during binary collisions of unequally-sized particles; ;
in Powder Technology (2017), 309(1), 95-109
Linear Dynamic Network Reconstruction from Heterogeneous Datasets; ; ;
in Linear Dynamic Network Reconstruction from Heterogeneous Datasets (2017, July)
Modelling of microcracking in image-based models of highly heterogeneous materials using the phase field method; ; ; ;
in 7th GACM Colloquium on Computational Mechanics (2017)
Comparison of design for composite beams in steel and concrete according to Eurocode 4 and Chinese Design Codes;
in XI Conference on Steel and Composite Construction (2017, November 23)
SIMULATION OF CONDENSATION IN A SLIGHTLY INCLINED TUBE AT COSMEA FACILITY WITH ATHLET CODE; ; ;
Scientific Conference (2017, September 06)
2016
GNSS related periodic signals in coordinate time-series from Precise Point Positioning; ; ;
in Geophysical Journal International (2016)
Impact of Limited Satellite Visibility on Estimates of Vertical Land Movements; ; ;
in International Association of Geodesy Symposia (2016)
On the Impact of Multi-GNSS Solutions on Satellite Products and Positioning; ; ;
Poster (2016, December 12)
Numerical Analysis for the determination of Stress Percolation in Dry-Stacked Wall Systems; ; ;
in Revue Technique (2016)
Numerical Analysis for the determination of Stress Percolation in Dry-Stacked Wall Systems; ; ;
in Masonry International (2016)
3D Crack Detection Using an XFEM Variant and Global Optimization Algorithms; ;
Scientific Conference (2016, May)
Stable 3D extended finite elements with higher order enrichment for accurate non planar fracture; ;
in Computer Methods in Applied Mechanics and Engineering (2016), 306
Well Conditioned and Optimally Convergent Extended Finite Elements and Vector Level Sets for Three-Dimensional Crack Propagation; ; ;
Scientific Conference (2016, June)
States and Unknown Input Estimation via Non-linear Sliding Mode High-Gain Observers for a Glucose-Insulin System; ;
Scientific Conference (2016, December)
States and unknown input estimation via non-linear sliding mode high-gain observers for a glucose-insulin system; ;
in IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), Kuala Lumpur, Malaysia, 2016 (2016, December 04)
The Status of GNSS Data Processing Systems to Estimate Integrated Water Vapour for Use in Numerical Weather Prediction Models; ; ;
in Willis, Pascal; Rizos, Chris (Eds.) IAG 150 Years Proceedings of the 2013 IAG Scientific Assembly, Postdam,Germany, 1–6 September, 2013 (2016)
Blood flow simulation using smoothed particle hydrodynamics: application to thrombus generation; ;
Scientific Conference (2016, March 31)
Implementing polarization shift keying over satellite – system design and measurement results; ; ;
in International Journal of Satellite Communications and Networking (2016), 34(2), 211-229
An evaluation of low-cost consumer-grade UAS systems for 3D reality capture; ;
Poster (2016, September 22)
CEN/TC250/SC4.T1:Assessment of the systematic review for Eurocode 4 by Projectteam SC4.T1; ; ; ; ;
Report (2016)
CFD-XDEM FOR PREDICTING MULTIPHASE FLOW BEHAVIOR THROUGH POROUS MEDIA;
Scientific Conference (2016, June 05)
Application of the extended discrete element method (XDEM) in the melting of a single particle; ;
in Baniasadi, Mehdi (Ed.) Application of the extended discrete element method (XDEM) in the melting of a single particle (2016, July 19)
Reduced order method for patient specific application: biomechanics of brain in presence of tumor; ;
Speeches/Talks (2016)
An Extended Cooperative Adaptive Cruise Control (CACC) Algorithm for Efficient Energy Consumption & Traffic Density Formulation; ; ;
in Traffic Flow Theory and Characteristics Committee (AHB45) 2016 Summer Meeting, Sydney, Australia, 2016 (2016, July 02)
Impact of Different Spacing Policies for Adaptive Cruise Control on Traffic and Energy Consumption of Electric Vehicles; ; ;
in 24th Mediterranean Conference on Control and Automation (MED), Athens, Greece, 2016 (2016, June 23)
Virtual-power-based quasicontinuum methods for discrete dissipative materialsScientific Conference (2016, June)
Virtual-power-based quasicontinuum methods for discrete dissipative materials;
Scientific Conference (2016, June)
A comparison of two meso-models for dry-woven fabrics and their multiscale equivalents; ;
Scientific Conference (2016, April)
POD-based reduction methods, the Quasicontinuum Method and their Resemblance; ;
Scientific Conference (2016, June 27)
Study of space weather impact on Antarctica ionosphere from GNNS data; ; ; ; ; ;
Poster (2016, April 29)
On the Unknown Input Functional Observers Design: a Polytopic Takagi-Sugeno Approach; ;
in 24th Mediterranean Conference on Control and Automation (MED), Athens, Greece, 2016 (2016, June)
A Polytopic Approach for the Nonlinear Unknown Input Functional Observers Design: Application to a Quadrotor Aerial Robots Landing; ;
in 2016 European Control Conference (ECC), Aalborg, Denmark (2016, June)
Collaborative Explanation and Response in Assisted Living Environments Enhanced with Humanoid Robots; ; ; ; ; ; ;
in 8th International Conference on Agents and Artificial Intelligence, ICAART, Rome, Italy, 2016 (2016)
MultiCoSteel – Structural Behaviour of Heavy Composite Columns with Multiple Encased Steel Profiles for High Rise Buildings; ;
Conference given outside the academic context (2016)
Simulating topological changes in real time for surgical assistance; ; ; ; ; ; ; ; ;
Speeches/Talks (2016)
Generalizing the isogeometric concept: weakening the tight coupling between geometry and simulation in IGA; ; ;
Scientific Conference (2016, May 30)
Weakening the tight coupling between geometry and simulation in isogeometric analysis; ; ;
Scientific Conference (2016, June 05)
Hybrid mesh/particle meshless method for modeling geological flows with discontinuous transport properties; ; ;
E-print/Working paper (2016)
Design of single span beams in SLS and ULS using semi-continuous beam-to-column joints - Part 1: Beams with constant bending stiffness and joints according to EN 1993-1-8; ; ;
in Steel Construction (2016), 9(1), 1-15
Experimental Lifetime Investigation of Series Connected Li-ion Cells at Different Operation Strategies; ;
Poster (2016, April 26)
Effects of incorporating activity duration and scheduling utility on the equilibrium-based dynamic traffic assignment;
Scientific Conference (2016, July)
A network-wide assessment of local signal control policies’ performance in practical implementations; ;
in Intelligent Transportation Systems (ITSC), 2016 IEEE 19th International Conference on (2016, November)
New insights into the Kawah Ijen hydrothermal system from geophysical data; ; ; ; ; ; ; ;
in Geological Society Special Publication (2016), 437
Invariant Observer Applied to Anaerobic Digestion Model; ; ;
in IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin, Germany, 2016 (2016, September)
La conversion de CO2, NOx et/ou SO2 en utilisant la technologie du charbon actifDoctoral thesis (2016)
Prédiction de la résistance mécanique d’un bloc de maçonnerie sans joint par calcul numérique; ; ; ; ;
Presentation (2016, July 06)
XDEM for Tuning Lumped Models of Thermochemical Processes Involving Materials in the Powder State; ; ; ; ;
in Engineering Journal (2016), 20(5), 187-201
Single station Monitoring of Volcanoes Using Seismic ambient noise; ; ; ;
Poster (2016, December 16)
Single station monitoring of volcanoes using seismic ambient noise; ; ; ;
in Geophysical Research Letters (2016)
A Modularization Approach for Nonlinear Model Predictive Control of Distributed Fast Systems; ; ;
in 24th Mediterranean Conference on Control and Automation (MED), Athens, Greece, June 21-24, 2016 (2016, June 22)
A real-time model predictive position control with collision avoidance for commercial low-cost quadrotors; ; ;
in IEEE Multi-Conference on Systems and Control (MSC 2016), Buenos Aires, Argentina, 2016 (2016, September 20)
A tracking error control approach for model predictive position control of a quadrotor with time varying reference; ; ;
in IEEE International Conference on Robotics and Biomimetics ROBIO, Qingdao, China, 2016 (2016, December 06)
Taking a Look at the Utilisation of Function Models in Interdisciplinary Design: Insights From Ten Engineering Companies; ;
in Research in Engineering Design (2016)
HPC or the Cloud: a cost study over an XDEM Simulation; ; ; ;
in Proc. of the 7th International Supercomputing Conference in Mexico (ISUM 2016) (2016)
Condition assessment and damage localisation for bridges by use of the Deformation Area Difference Method (DAD-Method);
in Performance-based approaches for concrete structures (2016, November)
Numerical investigation of bridges with the aim of condition assessment in applying the Deformation Area Difference method (DAD-method) and selecting appropriate measurement techniques; ;
in 5th International Symposium on Life-Cycle Civil Engineering (IALCCE 2016), Delft (2016, October)
Demo: Applications of the CPAL language to model, simulate and program Cyber-Physical Systems; ; ;
Poster (2016, April 12)
Sociability-Driven User Recruitment in Mobile Crowdsensing Internet of Things Platforms; ; ; ; ;
in IEEE Global Communications Conference (GLOBECOM), Washington, DC, USA, 2016 (2016, December)
New services, new travelers, old models? Directions to pioneer public transport models in the era of big data; ;
in Journal of Intelligent Transportation Systems (2016)
Estimating speed profiles from aerial vision - A comparison of regression based sampling techniques; ;
in Proceedings of the IEEE 24th Mediterranean Conference on Control and Automation (2016, June)
New unified H-infinity dynamic observer design for linear systems with unknown inputs; ; ;
in Automatica (2016), 65
Towards a framework of choices made during the life-cycle of process models; ;
in Marjanovic, Dorian (Ed.) Proceedings of the International Design Conference - DESIGN'16 (2016)
An exploratory study of the discovery and selection of design methods in practice; ;
in Journal of Mechanical Design (2016), 138
Robust control strategy for minimising energy consumption of electric buses using cooperative ITS technology; ;
Scientific Conference (2016)
2-stage process for a higher flexibility of biogas-plants; ;
Scientific Conference (2016, September 21)
Optimum stochastic modeling for GNSS tropospheric delay estimation in real-time; ; ; ;
in GPS Solutions (2016)
Bayesian statistical inference on the material parameters of a hyperelastic body; ;
in Proceedings of the ACME-UK 2016 24th Conference on Computational Mechanics (2016, March 31)
Using Bayesian inference to recover the material parameters of a heterogeneous hyperelastic body; ;
Scientific Conference (2016)
Hybrid Societies: Challenges and Perspectives in the Design of Collective Behavior in Self-Organizing Systems; ; ; ; ; ; ; ; ; ; ; ;
in Frontiers in Robotics and AI (2016), 3(14),
Kläranlagen – die Energie- und Nährstofffabriken der Zukunft?in Tagungsband Bensheimer Abwassersymposium (2016, July 07)
An adaptive biasing method for SRD comb generators; ;
in 2016 German Microwave Conference (GeMiC) (2016)
Efficient propagation of uncertainty through an inverse non-linear deformation model of soft tissue; ;
Scientific Conference (2016, June)
Propagating uncertainty through a non-linear hyperelastic model using advanced Monte-Carlo methods; ;
Scientific Conference (2016, May)
Propagating uncertainty using FE advanced Monte-Carlo methods: application to non- linear hyperelastic models; ;
Presentation (2016, May 09)
Stochastic FE analysis of brain deformation with different hyper-elastic models; ;
Scientific Conference (2016, September)
FE modelling with strong discontinuities for 3D tensile and shear fractures: Application to underground excavation; ; ;
in Computer Methods in Applied Mechanics and Engineering (2016), 309
Biogasprognose zur Integration von Kläranlagen in virtuelle Kraftwerke;
in Bedarfsgerechte Energiebereitstellung durch Kläranlagen als Baustein der Energiewende (2016)
A fast, certified and "tuning free" two-field reduced basis method for the metamodelling of affinely-parametrised elasticity problems; ;
in Computer Methods in Applied Mechanics and Engineering (2016), 298
Graph-based Software Knowledge: Storage and Semantic Querying of Domain Models for Run-Time Adaptation; ; ; ;
in IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots SIMPAR, San Francisco, Dec 2016 (2016, December)
Energy consumption of non-retrofitted institutional building stock inLuxembourg and the potential for a cost-efficient retrofit; ; ;
in Energy and Buildings (2016), 123(2016), 162-168
An Optimization-Based Iterative Learning Method for Anticipatory Network Traffic Control; ; ;
in Proceedings of the 16th COTA International Conference of Transportation Professionals (2016)
A dual control approach for repeated anticipatory traffic control with estimation of network flow sensitivity; ;
in Journal of Advanced Transportation (2016)
An iterative learning approach for anticipatory traffic signal control on urban networks; ;
in Transportmetrica B: Transport Dynamics (2016)
Repeated anticipatory network traffic control using iterative optimization accounting for model bias correction; ;
in Transportation Research. Part C : Emerging Technologies (2016)
A New Vertical Land Movements Data Set from a Reprocessing of GNSS at Tide Gauge Stations; ; ; ; ; ;
Scientific Conference (2016, July 30)
Combination of Tide Gauge Benchmark Monitoring (TIGA) Analysis Center from repro2 solutions;
Poster (2016, April 19)
Quality assessment of Mulit-Year BLT Tide Gauge Benchmark Monitoring (TIGA) repro2 Solution;
Poster (2016, February)
Error analysis of Tide Gauge Benchmark Monitoring (TIGA) Analysis Center stacked solutions; ; ; ;
Poster (2016, December 12)
Status of TIGA activities at the British Isles continuous GNSS Facility and the University of Luxembourg; ; ;
in International Association of Geodesy Symposia (2016), 143
Analysis of the impact of ROS in networks describing neurodegenerative diseasesDoctoral thesis (2016)
La medición de la pobreza y la indigencia en la Argentina; ; ; ; ; ; ; ;
Diverse speeches and writings (2016)
Force-Controlled Robotic Assembly Processes of Rigid and Flexible Objects: Methodologies and ApplicationsBook published by Springer (2016)
Agentenbasierte Steuerung der Mensch-Roboter-Interaktion; ;
in Automatisierungstechnische Praxis (2016), 12
Demontage von Elektroantrieben mit Assistenzrobotern zum wirtschaftlichen Recycling; ;
in Tagungsband AALE 2016 (2016)
Adaptive Control of Robotic arm with Hysteretic Joint; ; ; ;
in 4th International Conference on Control, Mechatronics and Automation (ICCMA'16), Barcelona, Spain 2016 (2016)
Adaptive Control of Hysteretic Robotic arm in Operational Space; ; ; ;
in 5th International Conference on Mechatronics and Control Engineering ICMCE, venice, Italy, 2016 (2016, December 14)
Control of Aerial Manipulation Vehicle in Operational Space; ; ; ;
in 8th International Conference on Electronics, Computers and Artificial Intelligence, Ploiesti, Romania, 30 June-02 July 2016 (2016, July 01)
Model Predictive Control for Spacecraft Rendezvous; ; ; ;
in 4th International Conference on Control, Mechatronics and Automation ICCMA '16, Barcelona, Spain, 2016 (2016)
Air centre structure of automotive heat exchangers in view of its post-buckling behaviourin Mania, Radoslaw (Ed.) STATICS, DYNAMICS AND STABILITY OF STRUCTURES (2016)
Application of structural topology optimisation for planetary carrier designin Kolakowski, Zbigniew (Ed.) SELECTED PROBLEMS OF CONTINUUM MECHANICS (2016)
Isogeometric finite element analysis of time-harmonic exterior acoustic scattering problems; ;
E-print/Working paper (2016)
Adaptive SMC For Trajectory Tracking In FreeForm Grinding;
in 2016 IEEE International Conference on Industrial Informatics, Poitiers, 18th-21st July 2016 (2016, July)
BELBIC-Sliding Mode Control of Robotic Manipulators with Uncertainties and Switching Constraints;
in Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition (2016, November)
Trajectory Tracking for Robotic Freeform Grinding;
in Cahier Scientifique - Revue Technique Luxembourgeoise (2016), 1(2016), 6-7
Accessing of Post-SPeoiswmeirc-LDaewfoPrrmoapteiortnies in Land Movements; ; ; ; ;
Presentation (2016, June)
Total Impact of Periodic Terms and Coloured Noise on Velocity Estimates; ; ; ;
Poster (2016, February 05)
The Combined Effect of Periodic Signals and Noise on the Dilution of Precision of GNSS Station Velocity Uncertainties; ; ; ;
Poster (2016, April 05)
On the Properties of Zenith Total Delay Time Series from Reprocessed GPS Solutions; ; ; ; ;
Poster (2016, July 29)
Geodetic measurements reveal similarities between post–Last Glacial Maximum and present-day mass loss from the Greenland ice sheet; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Science Advances (2016), 2(9),
Salario y reproducción de la fuerza de trabajo en la Argentinain Realidad Económica (2016), (300), 75--99
A real-time holding decision rule accounting for passenger travel cost; ; ;
Scientific Conference (2016, November 04)
The Cost of Environmental Constraints in Traffic Networks: Assessing the Loss of Optimality; ; ;
in Networks and Spatial Economics (2016)
Efficient Implementation of NIST-Compliant Elliptic Curve Cryptography for 8-bit AVR-Based Sensor Nodes; ; ;
in IEEE Transactions on Information Forensics and Security (2016), 11(7), 1385-1397
Numerical study of magnetic particles concentration in biofluid (blood) under the influence of high gradient magnetic field in microchannel; ; ; ; ;
Scientific Conference (2016, June)
Numerical studies of magnetic particles concentration in biofluid (blood) under the influence of high gradient magnetic field in microchannel; ; ; ; ;
Scientific Conference (2016, July 15)
A 3D shear material damping model for man-made vibrations of the ground;
in 13th Baltic Sea Region Geotechnical Conference (2016, September)
Modeling of the biomass combustion on a forward acting grate using XDEM; ; ; ;
in Chemical Engineering Science (2016), 142
Numerical study of the influence of particle size and packing on pyrolysis products using XDEM; ; ;
in International Communications in Heat and Mass Transfer (2016), 71
UAV degradation identification for pilot notification using machine learning techniques; ; ; ;
in Proceedings of 21st IEEE International Conference on Emerging Technologies and Factory Automation ETFA 2016 (2016, September 06)
Laser annealing of electrodeposited CuInSe2 Semiconductor Precursors: Experiment and Modeling; ; ; ; ; ; ; ;
in Journal of Materials Chemistry C (2016)
Field tests of centralized and decentralized ventilation units inresidential buildings – Specific fan power, heat recovery efficiency,shortcuts and volume flow unbalances; ; ;
in Energy and Buildings (2016), 116(2016), 376-383
Temporal variation of tidal parameters in superconducting gravimeter time-series; ; ;
in Geophysical Journal International (2016), 205(1), 284-300
A comparison of interannual hydrological polar motion excitation from GRACE and geodetic observations;
in Journal of Geodynamics (2016), 99
Direct electro-optical pumping for hybrid CdSe nanocrystal/III-nitride based nano-light-emitting diodes; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Applied Physics Letters (2016), 108
Nano-light-emitting-diodes based on InGaN mesoscopic structures for energy saving optoelectronics; ; ; ; ; ;
in Applied Physics Letters (2016), 109
Effects of particle size distribution on drying characteristics in a drum by XDEM: A case studyin Chemical Engineering Science (2016), 152
Public Transport in the Era of ITS: ITS Technologies for Public Transport; ; ; ;
in Gentile, Guido; Klaus, Noekel (Eds.) Public Transport in the Era of ITS (2016)
Overcoming Design Fixation: Design-by-Analogy Studies and Non-Intuitive Findings; ; ; ;
in Artificial Intelligence for Engineering Design, Analysis and Manufacturing – AIEDAM (2016), 20(2), 185-199
An explorative interview study on crisis situations in engineering product development; ; ;
in Marjanovic, Dorian (Ed.) Proceedings of the International Design Conference - DESIGN'16 (2016)
Linear smoothing over arbitrary polytopes for compressible and nearly incompressible linear elasticity; ; ; ;
Scientific Conference (2016, June)
Détection de l'évolution du réseau tridimensionnel de fissures dans des matériaux poreux fragiles; ; ; ;
in Conference: Techniques d'Imagerie pour la Caractérisation des Matériaux et des Structures du Génie Civil (2016)
3D experimental detection and characterization of microcracking in porous cement based materials; ; ;
in Fracture Mechanics for Concrete and Concrete Structures 2016 (2016)
A phase field method for modelling stress corrosion crack propagation in a nickel base alloy; ; ; ;
in 21st European Conference on Fracture (2016)
On the choice of parameters in the phase field method for simulating crack initiation with experimental validation; ; ; ; ; ;
in International Journal of Fracture (2016), 197(2), 213--226
A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography; ; ; ;
in Computer Methods in Applied Mechanics and Engineering (2016), 312
Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: Direct comparison between in situ testing-microCT experiments and phase field simulations; ; ;
in Journal of the Mechanics and Physics of Solids (2016), 95
Phase field modeling of complex matrix/interfacial crack propagation in complex microstructures obtained from microtomography images; ; ;
in Engineering Mechanics Institute Conference (2016)
Modelling interfacial cracking with non-matching cohesive interface elements; ; ;
in Computational Mechanics (2016), 58(5), 731-746
Static load testing with temperature compensation for structural health monitoring of bridges; ; ;
in Engineering Structures (2016), 127(2016), 700-718
Damage detection for bridge structures based on dynamic and static measurements; ; ;
Scientific Conference (2016, March)
Structural health monitoring based on static measurements with temperature compensation; ; ;
in QUALITY SPECIFICATIONS FOR ROADWAY BRIDGES, STANDARDIZATION AT A EUROPEAN LEVEL (2016)
A Three-Dimensional Remeshed Hybrid Smooth Particle-mesh MethodScientific Conference (2016, June 10)
A Standardized Value Stream Management Method for Supply Chain NetworksPresentation (2016, January 29)
A Standardized Value Stream Management Method for Supply Chain Networks;
in Dimitrov, Dimiter; Oosthuizen, Tiaan (Eds.) Proceedings - International Conference on Competitive Manufacturing (2016)
Investigation of hybrid steel-glass beams with adhesive silicone shear connection;
in Steel Construction (2016), 9(3), 207-221
Vision-Based Steering Control, Speed Assistance and Localization for Inner-CityVehicles; ; ; ; ;
in Sensors (2016), 16(3), 362
A Generalized Interaction Wake Model with Its Variation for Control in Wind Farms; ;
in 35th Chinese Control Conference, Chengdu. China, 2016 (2016, July 28)
Generalized Wake Interaction Models and Optimal Control in Wind Farms; ;
in 28th Control and Decision Conference (CCDC), China, 2016 (2016, May 28)
3D fatigue fracture modeling by isogeometric boundary element methods; ; ;
Scientific Conference (2016, April 01)
Isogeometric boundary element methods for three dimensional static fracture and fatigue crack growth; ; ;
in Computer Methods in Applied Mechanics and Engineering (2016)
Linear elastic fracture simulation directly from CAD: 2D NURBS-based implementation and role of tip enrichment; ; ;
in International Journal of Fracture (2016)
A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxide; ; ; ; ;
in LA METALLURGIA ITALIANA (2016), (3), 49-54
Berechnung des Transportes von Treibgut bei Hochwasser; ;
in 39. DRESDNER WASSERBAUKOLLOQUIUM (2016)
Engineering Education at the University of Luxembourg - Hand in hand with national industryScientific Conference (2016, September)
Value Stream Management zur Synchronisation im UnternehmensverbundScientific Conference (2016, October)
ON THE INFLUENCE OF DIFFERENT MAPPING TECHNIQUES FOR A MULTISCALE APPROACH TO TURBULENT THREE-PHASE FLOWS;
Scientific Conference (2016, June 06)
Shear strength and stiffness degradation of geomaterials in cyclic loading;
in Soils and Rocks (2016), 39(3), 273-283
A novel optimization approach to estimating kinetic parameters of the enzymatic hydrolysis of corn stover;
in AIMS Energy (2016), 4(1), 52-67
Lightweight robotic arm actuated by Shape Memory Alloy (SMA) Wires; ; ;
in 8th International Conference on Electronics, Computers and Artificial Intelligence, Ploiesti, Romania, 30 June-02 July 2016 (2016, July 01)
Operational Space Control of a Lightweight Robotic Arm Actuated By Shape Memory Alloy (SMA) Wires; ; ;
in ASME 2016 Conferences on Smart Materials, Adaptive Structures and Intelligent Systems, Vermont 28-30 September 2016 (2016, September)
A Bayesian approach for parameter identification in elastoplasticity; ; ;
Scientific Conference (2016, June)
A Bayesian approach for parameter identification in elastoplasticity; ; ;
Scientific Conference (2016, June 09)
Bayesian inference for material parameter identification in elastoplasticity; ; ;
Scientific Conference (2016, September 07)
Bayesian inference for parameter identification in computational mechanics; ; ;
Poster (2016, December 12)
An introduction to Bayesian inference for material parameter identification; ; ;
Presentation (2016, February 04)
Numerical Modeling of Flow-Driven Piezoelectric Energy Harvesters;
Scientific Conference (2016, June 09)
Numerical Modeling of Flow-Driven Piezoelectric Energy Harvesting Devices;
in Ibrahimbegovic, Adnan (Ed.) Computational Methods for Solids and Fluids (2016)
Wie bilanzieren die europäischen Staaten in Luxemburg, Deutschland, Belgien, der Schweiz und in Frankreich? Ein Vergleich verschiedener nationaler Berechnungsvorschriften der Gesamtenergieeffizienz anhand von 9 klimatisierten Bürogebäuden und deren Realverbrauch; ;
in cci Zeitung - Führende Fachzeitung für die LüKK (Lüftung- Klima- Kältebranche) (2016)
Stationary Wavelet Transform denoising in Pulsed Thermography: influence of camera resolution on defect detection; ; ;
in Proceedings of 13th Conference on Advanced Infrared Technology and Applications (2016)
Network observability information maximization through ad-hoc route enumeration approaches; ;
Scientific Conference (2016, June)
Improving the accuracy of OD estimation from traffic counts employing a partial observabillity maximizing methodology; ; ;
Scientific Conference (2016, January)
A sensitivity-based approach for adaptive decomposition of anticipatory network traffic control; ;
in Transportation Research. Part C : Emerging Technologies (2016), 66
A PAS-state constrained optimization formulation for the anticipatory network traffic control problem;
Scientific Conference (2016, September)
Clustering Deviations for Black Box Regression Testing of Database Applications;
in IEEE Transactions on Reliability (2016), 65(1), 4-18
A variational formulation of dissipative quasicontinuum methods; ; ;
in International Journal of Solids and Structures (2016), 102-103
Public Transport in the Era of ITS: The Role of Public Transport in Sustainable Cities and Regions; ;
in Public Transport in the Era of ITS (2016)
Experimental studies on the development of a solar hybrid module with an aluminum microchannel evaporator; ; ; ; ;
in Proceedings of 2016 International Energy and Sustainability Conference (IESC 2016) (2016)
Entwicklung eines PVT-basierten Wärmepumpensystems auf der Basis von CO2 Direktverdampfung; ; ; ;
in Proceedings of Deutsche Kälte- und Klimatagung (DKV) (2016)
Nonlinear Model Predictive Extended Eco-Cruise Control for Battery Electric Vehicles; ;
in 24th Mediterranean Conference on Control and Automation (MED), Athens, Greece, 2016 (2016, June 22)
Complaint Ontology Pattern - COP; ; ; ; ; ;
in Workshop on Ontology and Semantic Web Patterns, Kobe 18 October 2016 (2016)
Modeling relevant legal information for consumer disputes; ; ;
in EGOVIS 2016: Electronic Government and the Information Systems Perspective (2016, September)
Symbiose aus Stahl und Stein - innovative Lösungen; ; ; ; ;
in Revue Technique Luxembourgeoise (2016), 04/2016
Eine innovative Stahlverbundlösung für komplexe innerstädtische Bauprojekte; ; ; ; ;
in Stahlbau (2016), 04/16
POD-based Reduction Methods, the Quasicontinuum Method and their Resemblance; ;
Scientific Conference (2016, June)
Reducing non-linear PDEs using a reduced integration proper orthogonal decomposition method; ; ;
Scientific Conference (2016)
Acoustic-Emission-Analysis of Dissimilar Laser-welds of Aluminium and Polyamide 6.6; ; ;
in Universal Journal of Materials Science (2016), 4(6), 119-124
Process Robustness of Laser Braze-Welded AlCu Connectors; ;
in SAE International Journal of Alternative Powertrains (2016), 5(1),
A Flexible Move Blocking Strategy to Speed up Model-Predictive Control while Retaining a High Tracking Performance; ; ;
in 2016 European Control Conference (ECC), Aalborg, Denmark (2016, June)
A Fast Model-Predictive Speed Controller for Minimised Charge Consumption of Electric Vehicles; ; ;
in Asian Journal of Control (2016), 18(5),
Efficient Arithmetic on ARM-NEON and Its Application for High-Speed RSA Implementation; ; ;
in Security and Communication Networks (2016), 9(18), 5401-5411
Towards Optimised Large Scale Deployments of Electric Bus Systems with On-Route Charging; ;
Scientific Conference (2016, October)
A Survey of Cooperative ITS for Next Generation Public Transport Systems;
in Intelligent Transportation Systems (ITSC), 2016 IEEE 19th International Conference on (2016, November)
Impact of Antenna Phase Centre Calibrations on Position Time Series: Preliminary Results;
in Willis, Pascal; Rizos, Chris (Eds.) IAG 150 Years Proceedings of the 2013 IAG Scientific Assembly, Postdam,Germany, 1–6 September, 2013 (2016)
Analyzing the correlation between commuting satisfaction and travelling utility; ;
Scientific Conference (2016, July 13)
Considering activity pattern to achieve a more sustainable commuting behavior; ; ;
Scientific Conference (2016, September 19)
Cross-border activity-travel patterns: the Luxembourg residents perspective; ;
Scientific Conference (2016, October 07)
Investigation of Bonded Connections with Silicone under Shear Loading; ;
in Bos, Freek; Louter, Christian; Belis, Jan (Eds.) Challenging Glass 5 - Conference on Architectural and Structural Applications of Glass, Ghent, 16 & 17 June 2016 (2016, June 16)
Numerical simulation and Identification of the Failure Criterion for Structural Silicone; ;
Speeches/Talks (2016)
Numerical methods for fracture/cutting of heterogeneous materials; ; ; ; ; ;
Presentation (2016, December)
Energy minimizing multi-crack growth in linear elastic fracture using the extended finite element method;
in ACME-UK 2016 24th Conference on Computational Mechanics (2016, March 31)
A First Evaluation of the new GNSS Station Installations at the Tide Gauges of Walvis Bay and Lüderitz in the Republic of Namibia; ; ; ; ;
Poster (2016, February 11)
Multi-GNSS Benefits to Real-Time and Long-Term Monitoring Applications; ; ; ; ; ; ;
Scientific Conference (2016, July 30)
The King Edward Point Geodetic Observatory, South Georgia, South Atlantic Ocean: A First Evaluation and Potential Contributions to Geosciences; ; ; ; ; ;
in Willis, Pascal; Rizos, Chris (Eds.) IAG 150 Years Proceedings of the 2013 IAG Scientific Assembly, Postdam, Germany, 1–6 September, 2013 (2016)
Automated Decision Support IoT Framework; ; ; ;
in IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin, Germany, 2016 (2016, September)
Generalizing the isogeometric concept: weakening the tight coupling between geometry and simulation in IGA; ; ;
Presentation (2016, June 02)
Weakening the tight coupling between geometry and simulation in isogeometric analysis; ; ;
Presentation (2016, June 07)
Energy saving in WWTP: Daily benchmarking under uncertainty and data availability limitations; ; ; ;
in Environmental Research (2016)
Stauverlust von Feinrechenanlagen - Vergleich verschiedener Berechnungsmethoden mit Messergebnissen; ; ;
in Korrespondenz Abwasser Abfall (2016)
Failure mechanisms and corresponding shape factors of shallow foundationsin Atalar (Ed.) Proceedings of 4th International Conference on New Developments in Soil Mechanics and Geotechnical Engineering (2016, June)
The influence of superposition and eccentric loading on the bearing capacity of shallow foundationsin Computations and Materials in Civil Engineering (2016), 1(3), 121-131
The influence of the shaft friction and pile shape on the pile tip bearing capacityin The 17th Nordic Geotechnical Meeting Reykjavik Iceland 25th - 28th of May 2016 (2016, May)
A dynamic route swapping and control algorithm that maximises network capacity accounting for node constraints and blocking back; ;
Scientific Conference (2016, July)
Masonry blocks from lightweight concrete on the basis of Miscanthus as aggregates; ; ;
in Barth, S; Murphy-Bokern, D; Kalinina, O; Taylor, G; Jones, MB (Eds.) Perennial Biomass Crops for a Resource Constrained World (2016)
Masonry blocks from lightweight concrete on the basis of miscnathus as aggregates; ; ;
in Barth, Susanne; Murphy-Bokern, Donal; Kalinina, Olena; Taylor, Gail (Eds.) Perennial Biomass Crops for a Resource-Constrained World (2016)
Continuous gravimetric monitoring as an integrative tool for exploring hydrological processes in the Lomme Karst System (Belgium); ; ; ; ; ; ; ;
Scientific Conference (2016)
Multiscale hydrogeological and hydrogeophysical approach to monitor vadose zone hydrodynamics of a karst system; ; ; ; ; ; ; ;
Poster (2016)
Concept to predict crack initiation and crack development in fairfaced concrete screeds;
in Beushausen, Hans (Ed.) Performance-based approaches for concrete structures (2016, November)
A Model to Predict Liquid Bridge Formation Between Wet Particles Based on Direct Numerical Simulations; ;
in AIChE Journal (2016), 62(6), 1877-1987
Error estimation and space-time adaptivity for the isogeometric analysis of transient structural dynamics; ; ;
Scientific Conference (2016, April 01)
Improving BDD-based attractor detection for synchronous Boolean networks.; ; ;
in Science China Information Sciences (2016), 59(8), 0801011-08010116
Modeling of Complex Microcracking in Quasi-Brittle Materials: Numerical Methods and Experimental Validations; ; ;
in Advances in Multi-Physics and Multi-Scale Couplings in Geo-Environmental Mechanics (2016)
Phase field modeling of complex matrix/interfacial crack propagation in complex microstructures obtained from microtomography images; ; ; ;
in ECCOMAS Congress 2016 (2016)
Phase field approach to fracture: Towards the simulation of cutting soft tissues; ; ;
Scientific Conference (2016, June 08)
Strongly-coupled modelling and analysis of energy harvesting devicesScientific Conference (2016, March 11)
Monolithic Modelling and Simulation of Flow-Driven Piezo-Composite Energy Harvesters;
Presentation (2016, February 17)
Simultaneous Analysis of Strongly-Coupled Composite Energy Harvester-Circuit Systems Driven by Fluid-Structure Interaction;
Scientific Conference (2016, July 27)
Strongly-coupled modelling and analysis of energy harvesting devices;
in Applied Mathematics and Mechanics (2016), 16
2015
Impact of Limited Multi-GNSS Visibility on Vertical Land Movement Estimates; ; ;
Poster (2015, June 27)
Signal Obstructions at GNSS Stations: Benefits From Multi-GNSS Observations; ; ;
Poster (2015, October 27)
Insight into metabolic pathways of the potential biofuel producer, Paenibacillus polymyxa ICGEB2008; ; ;
in Biotechnology for Biofuels (2015), 8(159),
Stable 3D extended finite elements with higher order enrichment for accurate non planar fracture; ;
in Computer Methods in Applied Mechanics and Engineering (2015)
Three-Dimensional Crack Propagation with Global Enrichment XFEM and Vector Level Sets; ; ;
Scientific Conference (2015)
Glucose-Insulin Minimal Model Augmented: Identification and Validation; ;
in AMCA Congreso Nacional de Control Automatico 2015, Guernavaca, Mexico, 2015 (2015)
Glucose-Insulin System based on Minimal Model: a realisitic approach; ;
in IEEE UKSim-AMSS Int. Conference on Modelling and Simulation, Cambridge, UK, 2015 (2015, March)
Robot and Human safety in a semi-automated assembly workspacein IEEE transactions (2015, October 02)
Generation of safe tool-path for 2.5D milling/drilling machine-tool using 3D ToF sensor;
in CIRP - Journal of Manufacturing Science and Technology (2015), 10
Path planning self-learning algorithm for a dynamic chaning environment;
Scientific Conference (2015, December)
Safe and Automated Assembly Process using Vision assisted Robot Manipulator;
in Procedia CIRP (2015)
Analysis of global climate variability from homogenously reprocessed ground-based GNSS measurements; ; ;
Scientific Conference (2015, April 14)
Analysis of Global Climate Variability from Homogenously Reprocessed Ground-based GNSS Measurements; ; ;
Poster (2015, June 26)
Error Controlled Adaptive Multiscale Method For Fracture Modelling in Polycrystalline materials; ;
in Philosophical Magazine (2015)
Scale selection in nonlinear fracture mechanics of heterogeneous materials; ;
in Philosophical Magazine (2015), 95(28-30), 3328-3347
Goals in Nutrition Science 2015–2020; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in Frontiers in Nutrition (2015), 2(26),
Advances in error estimation for homogenisation; ; ; ;
in 13th U.S. National Congress on Computational Mechanics (2015, July)
An Integrated Perspective on Traffic Management and Logistic Optimization; ; ; ; ;
in Proceedings of the 18th IEEE International Conference on Intelligent Transportation Systems, ITSC 2015 (2015)
Visual odometry based absolute target geo-location from micro aerial vehicle; ; ;
in International Conference on Robotics, Automation, Control and Embedded Systems (RACE), 2015 (2015, February 20)
Power Allocation in Multibeam Satellite Systems: A Two-Stage Multi-Objective Optimization; ; ; ; ;
in IEEE Transactions on Wireless Communications (2015)
Fundamental solutions and dual boundary element methods for fracture in plane Cosserat elasticity;
in Proceedings of the Royal Society a-Mathematical Physical and Engineering Sciences (2015), 471(2179),
The mechanical reliability of an electronic textile investigated using the virtual-power-based quasicontinuum method; ; ;
in Mechanics of Materials (2015), 80
Higher-order quasicontinuum methods for elastic and dissipative lattice models: uniaxial deformation and pure bending; ; ;
in GAMM Mitteilungen (2015), 38(2), 344-368
Mixing Taylor shifts and universal Taylor series; ;
in Bulletin of the London Mathematical Society (2015), 47
Performance Evaluation of the XDEM framework on the OpenStack Cloud Computing Middleware; ; ; ; ;
in Proceedings of the Fourth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering (2015, February)
Anticipation of brain shift in Deep Brain Stimulation automatic planning; ; ; ;
in IEEE Engineering in Medicine and Biology Society (2015)
An Approach for a Distributed World Model with QoS-Based Perception Algorithm Adaptation; ; ; ;
in 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems IROS, Hamburg, Germany, 2015 (2015)
Multi-scale methods for fracture: model learning across scales, digital twinning and factors of safety; ; ; ; ; ;
Scientific Conference (2015, November 18)
Locally equilibrated stress recovery for goal oriented error estimation in the extended finite element method; ; ; ; ;
in Computers and Structures (2015)
Adaptive methods for multiscale fracture; ; ;
in International Journal of Engineering Science (2015, January 01)
Multi-scale fracture, model reduction, CAD and image as a model; ; ; ;
Scientific Conference (2015, June 24)
Hybrid mesh/particle meshless method for geological flows with discontinuous transport properties; ; ; ;
Scientific Conference (2015, April 12)
Analyses of the loadbearing behaviour of deep-embedded concrete dowels, CoSFB; ;
in Steel Construction (2015), 8(3), 167-173
fenics-shells: a UFL-based library for simulating thin structures; ; ;
Scientific Conference (2015, July 01)
Real-time surgical simulation using a lattice-continuum approach; ; ;
Presentation (2015, February 06)
On the link between activity patterns and traffic within-day demand profiles: empirical analysis and application to demand estimation;
Scientific Conference (2015, September)
A two-steps dynamic demand estimation approach sequentially adjusting generations and distributions; ; ;
in Proceedings of IEEE-ITS Conference (2015, September)
Systematic assessment of local & global signal control policies: A methodological perspective; ; ; ; ;
in Proceedings of 2015 International Conference on Models and Technologies for Intelligent Transportation Systems, MT-ITS 2015 (2015)
Systematic analysis of global and local control policies; ; ; ; ;
in Periodica Polytechnica Transportation Engineering (2015)
Systematic assessment of local & global control policies: A methodological perspective; ; ; ; ;
in Proceedings of the MT-ITS Conference (2015, June)
Editorial: Challenges, specificities and commonalities of transport research and policy within the BENELUX countries–the case of Luxembourg; ; ;
in European Journal of Transport and Infrastructure Research (2015), 15(4), 501-505
Contenido y formas de la población sobrante y aproximaciones a su determinación cuantitativa en la Argentina a comienzos del siglo XXI; ; ;
in VIII Jornadas de Economía Crítica, Río Cuarto (2015)
Nueva división internacional del trabajo, diferenciación y superpoblación relativa: un análisis de sus relaciones y determinaciones; ; ;
in VIII Jornadas de Economía Crítica, Río Cuarto (2015)
A preliminary investigation of the growth of an aneurysm with a multiscale monolithic Fluid-Structure interaction solver; ;
in Journal of Physics: Conference Series (2015), 655(1), 012050
Numerical validation of a κ-ω-κ θ -ω θ heat transfer turbulence model for heavy liquid metals; ; ; ; ;
in Journal of Physics: Conference Series (2015), 655(1), 012046