LiveSatPreDem – Live Satellite Precoding Demonstration
Title: LiveSatPreDem – Live Satellite Precoding Demonstration
Funding source: ESA - European Space Agency
Prime Contractor: SnT
Partners: SES, Airbus Defence and Space
Principal investigator: Prof. Symeon Chatzinotas
Researchers: Dr. Juan Merlano Duncan, Dr. Nicola Maturo, Dr. Jorge Querol, Dr. Jevgenij Krivochiza
Objectives
The objective of this study is to implement and demonstrate, through live demonstration over a real GEO satellite, Multi-User Multiple Input Single Output (MU-MISO) digital signal processing techniques, namely precoding, in the Forward (FWD) link of a multi-beam satellite system operating in full frequency reuse (FFR). While standard technologies, as for DVB-S2, operate using an interference avoidance approach through a proper re-use of the spectrum amongst beams, more recent paradigms have been proposed which go in the opposite direction through the management of the interference amongst beams. The objective is clearly to maximize the use of the available spectrum which represents a limited resource of the system.
The study shall increase the maturity of the technology to a TRL 5. To this aim, the demonstrator shall implement all the functionalities of a precoding-based system: synchronization and collection of the estimated Channel State Information (CSI), precoding-specific smart user-scheduling techniques and Modulation and Coding (Modcod) allocation, computationally-efficient calculation of the precoder and application of the resulting precoder to the vectors of symbol streams to be transmitted by the GW. The benchmark for this study is an equivalent system operating in a colour reuse scheme that basically entails an interference avoidance approach.
Challenges
The main challenge of the project is the reduced cost per delivered bit over the satellite by researching and implementing the new technologies. By upgrading the satellite modems and making minor adaptations to satellite payloads, the technology can provide much faster and more accessible broadband service. This improvement can be used to increase the turnover of satellite operators while providing superior quality of service to the users. It should be also noted that the technology allows the satellite operators to dynamically allocate the broadband capacity to the areas where it is needed the most, enabling a higher level of adaptability in terms of space assets. Satellite service coverage can be a subject of economic demand in developing countries and act as emergency services to backup areas with high-risk of natural disasters, where local telecommunication services might be temporally disabled. In the current phase the team is in the process of bringing the technology to TRL 5.
Benefits
The study has led to the design and development of new technologies and products in the area of satellite communications (satcom). SIGCOM in collaboration with SES has defined the technical requirements for the satellite communication payloads, needed to support the switch from classic 4 color reuse scheme to full frequency reuse through precoding technology. These are already considered for the SES missions to be flown in the near future. SIGCOM has implemented the main algorithms into model prototypes which have been used to demonstrate the increased satellite channel capacity in the lab and enable to prepare a live demonstration over satellite.
Features
The product features many technologies which previously have never been used in SATCOMs. The precoding enabling technology is the DVB-S2X superframe standard, defined within ETSI and DVB organizations. By using the superframe transmission UTs can estimate CSI to evaluate inter-beam interference, which a gateway can later precompensate by using Zero-Forcing or minimum mean squared error (MMSE) precoding with advanced per-antenna power constraints (PACs) for the improved performance. The precoding technology is supported by an advanced user scheduling in the SATCOM network. These two techniques allow SATCOM to efficiently reuse available frequency channels and to operate in a broadband regime. It means that the channel capacity through a network of satellites can be flexibly managed and reallocated accordingly to the constantly varying demands of the on-ground terminals within the service coverage. The project features an in-lab demonstration of the aforementioned technologies, emulating a full chain from the gateway with 16 beams to the 16 UTs. Additionally, a live demonstration is planned for over satellite demonstration for 2 beams and 2 UTs.
System Architecture
The figures below shows a general block diagram of the demonstrator.
The main functional blocks of the Precoding demonstrator are: a precoding enabled gateway, a satellite MIMO channel emulator and a set of user terminal receivers.
The proposed infrastructure is based on Software Defined radio platform by National Instruments.
Project Partners:
- SnT, University of Luxembourg, Luxembourg
- SES, Luxembourg
- Airbus Defence and Space, France
Funding Source: European Space Agency (ARTES AT)
Project Start Date: 03/2018
Project End Date: 04/2021
Project Team:
Project Manager: Prof. Symeon Chatzinotas
Research Team:
Relevant links:
Contact:
- Dr. Symeon Chatzinotas, Full Professor
- Dr. Juan Merlano Duncan, Research Scientist
List of Publications:
J. Duncan, J. Krivochiza, S. Andrenacci, S. Chatzinotas and B. Ottersten, "Hardware demonstration of precoded communications in multi-beam UHTS systems," 36th International Communications Satellite Systems Conference (ICSSC 2018), Niagara Falls, ON, Canada, 2018, pp. 1-5, doi: 10.1049/cp.2018.1684.
N. Maturo et al., "Demonstrator of Precoding Technique for a Multi-Beams Satellite System," 2019 8th International Workshop on Tracking, Telemetry and Command Systems for Space Applications (TTC), Darmstadt, Germany, 2019, pp. 1-8, doi: 10.1109/TTC.2019.8895466.
J. Duncan, J. Querol, N.Maturo, J. Krivochiza, D.Spano, N. Saba, L. Martinez Marrero, S. Chatzinotas and B. Ottersten, “Hardware Precoding Demonstration in Multi-Beam UHTS Communications under Realistic Payload Characteristics,” in Proceedings of the 37th International Communications Satellite Systems Conference (2019, November 01), Okinawa (Japan)
